Air conditioning installation · Barnet

Air conditioning installation in Barnet: routing pipes and the condensate drain through an older house

An air conditioning unit looks simple on the wall, but behind it run three things that need a route: the refrigerant pipes, the electrical cable and the condensate drain. In an older house, with solid walls, panelled rooms and awkward floors, finding that route is the real work of the installation. People in Barnet planning a unit can think about it first and save themselves surprises on the day, which in an older house are rarely pleasant ones.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Streets of many ages surround Chipping Barnet, and solid brick walls are common in the older ones. Coring a hole through a solid wall is straightforward for an engineer but messy, and a hole in the wrong place can hit a gas pipe, a cable or a damp-proof course. Choosing the position of the indoor unit with the route in mind is wise.

The best indoor positions have a short, direct route to an outside wall. The pipes go through a hole of about sixty to eighty millimetres, sloping slightly down to the outside so condensate drains away. The drain runs to a gully, a downpipe or a soakaway, or is pumped away if there is no fall. Pipes can be hidden in trunking, inside a boxed corner or behind a cupboard. A photograph of the wall, inside and out, shows what lies on each side, and a second shot taken from a few metres back shows how the outdoor unit would look.

Pictures of the proposed indoor position and the wall behind it help Heat Go to say what route is likely, and a note on the wall’s construction and what lies on the other side completes the picture.

Planning pipe and drain routes for an air conditioner in a Barnet house

Routing problems in different Barnet houses

Houses with solid brick walls

A core hole is clean but takes care. Check what lies behind the wall before choosing the spot.

Houses with a cavity and rendered finish

A hole through render must be sealed well. Say what the outside finish is.

Flats over a shop or office

A hole through an external wall may need the freeholder’s consent, so ask the agent first.

SettingParking and van accessProperty accessTypical enquiries
Houses with solid brick wallsRoadsideBedroomSolid walls
Houses with a cavity and rendered finishDrives commonFront bedroomRendered walls
Flats over a shop or officePermit zonesRear stairsConsent needed

Say how to reach the indoor position and the outside wall, and whether scaffolding or a ladder will be needed. Mention any shared passage or yard the engineer must cross.

A homeowner plans a unit for the back bedroom of an older house. She photographs the wall inside and out and finds that a gas pipe runs near the proposed hole outside. She sends the pictures to Heat Go with a note that the downpipe is at the corner. The reply suggests moving the hole a little to the left, running the condensate to the downpipe and hiding the pipes in a boxed corner.

Installations are easiest in dry weather, when walls can be cored and sealed cleanly. Planning in spring leaves time for the work to be done before the first hot spell.

Good to know in Barnet

Core hole

A neat round hole drilled through a wall for the pipes and cable. It slopes slightly outwards.

Condensate

Water that forms on the indoor coil. It must drain away freely.

Trunking

A plastic channel that hides pipes and cables on a wall.

Questions about air conditioning installation in Barnet

01How do the pipes get outside?

Through a core hole in an external wall, sealed afterwards.

02Where does the condensate water go?

To a drain, a gully or a downpipe, or it is pumped away if there is no fall.

03Can the pipes be hidden?

Often, in trunking, a boxed corner or behind a cupboard, though in a period room a painted channel in a matching colour is usually the least intrusive choice.

04Will drilling the wall damage anything?

Not if the engineer checks first for pipes, cables and damp-proof courses.

05Does the hole weaken the wall?

No, a core hole of that size does not, and it is sealed with a sleeve and sealant so that no draught or water can get past the pipes.

Talk to Heat Go

Ask about air conditioning installation in Barnet.

Given photographs of the wall, inside and out, and the Barnet road you live on, Heat Go can start talking about a route.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Air conditioning installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.