Bathroom plumbing · Barnet

Bathroom plumbing in Barnet: choosing a shower to suit the water pressure you have

A shower that looks wonderful on a showroom floor can be a disappointment at home if the water pressure does not suit it. Some showers need strong, even pressure. Others are designed to work with the gentle flow from a tank in the loft. Choosing the right one starts with finding out which kind of system the house has. People in Barnet planning a bathroom can find out with a few simple checks.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Barnet’s station has been open since 1872, and the houses of Chipping Barnet around it come from many eras. Older houses tend to have a cold-water tank in the loft feeding the hot water cylinder and the bathroom, a system sometimes called gravity-fed. Newer homes, or those that have been updated, may have mains-fed hot water or a combi boiler. The two kinds behave very differently when a shower is switched on.

The easiest check is to look in the loft. A cold-water tank in the loft, with pipes leading from it, suggests a tank-fed system, so the shower will rely on gravity or a pump. If there is no tank and the boiler supplies hot water directly, the system is probably mains-fed, and a shower can use mains pressure. A cylinder in an airing cupboard points towards stored hot water. Photographs of the loft and the cupboard tell the story.

Shower choice follows from the system behind it. Photographs of the loft, the cylinder or the boiler, with a note on how the water currently feels, let Heat Go suggest which types of shower are likely to work well.

Finding out your water system before choosing a Barnet shower

Showers and systems in different Barnet homes

Houses with a loft tank and cylinder

A gravity-fed system gives gentle pressure, especially if the shower is on the first floor. A pump may help, or a shower designed for low pressure.

Houses with a combi boiler

Hot water comes directly from the boiler, so pressure is that of the mains. Many showers work well, though demand elsewhere can reduce the flow.

Flats with shared supplies

Pressure depends on the building. A low-pressure supply may call for a particular shower type, so ask the managing agent.

SettingParking and van accessProperty accessTypical enquiries
Houses with a loft tank and cylinderRoadsideLoft hatchGravity systems
Houses with a combi boilerDrives commonBoiler cupboardMains pressure
Flats with shared suppliesPermit zonesCommon stairsShared supply

Say which door suits the engineer and how to reach the loft and the boiler. Photographs of the route to the bathroom help, since showers and screens are bulky.

A household wants a powerful shower on the first floor. They find a cold-water tank in the loft just above the bathroom and a cylinder in the cupboard. They photograph both, note that the existing shower is weak and send them with the make of the boiler. Heat Go can explain that the head of water is small, that a pump or a different type of shower may be needed and that the cylinder and the tank should be considered together.

A weak shower is most noticeable on cold mornings, when everyone wants hot water at the same time. Sorting the system out before winter avoids a season of dissatisfaction.

Good to know in Barnet

Gravity-fed

A tank above the shower gives pressure by height alone. The higher the tank, the stronger the flow, up to a point.

Mains-fed

A shower can use mains pressure directly, though flow depends on the supply to the house.

Pump

A pump boosts a gravity-fed supply, but it must suit the system and be placed correctly.

Questions about bathroom plumbing in Barnet

01How can I tell if the house has a loft tank system?

A cold-water tank in the loft and a cylinder in a cupboard usually mean it is.

02Will any shower work on low pressure?

No. Some are designed for it and some are not, so choose with the system in mind.

03Can a pump fix weak flow?

Often, but it must be suitable for the system and installed correctly.

04Does a combi boiler give strong flow?

It uses mains pressure, which is usually good, but demand elsewhere can reduce it.

05What if the shower is on the ground floor?

A ground-floor shower has less head of water and may need a pump.

Talk to Heat Go

Ask about bathroom plumbing in Barnet.

The loft photographs, the boiler make and a short description of the shower you have now give Heat Go enough to talk about suitable options for your Barnet home.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Bathroom plumbing enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.