Plumbing installations · Holloway

Plumbing installations in Holloway: fitting a water softener or scale reducer, and where the bypass, the drain and the power must go

London’s hard water leaves limescale on taps, kettles and heating elements, and many households consider a softener or a scale reducer. Fitting either is a plumbing job as much as an appliance job: it needs a place, a bypass, often a drain and sometimes a power socket. Households in Holloway can ask the plumber how it will be installed before choosing a unit.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Holloway homes are often compact, with a single point where the mains supply enters, sometimes in a kitchen cupboard or under the stairs, and not much room for a unit. The incoming pipe may be plastic or copper, and its size and position affect where a softener can go.

A salt-based softener is a floor-standing unit that needs space for itself and for a salt store, a connection to the incoming water, a drain connection for its regeneration water, and a power supply for its control head. A scale reducer is a smaller device that fits on a pipe, and may need no drain, though it may need a power supply too. The plumber should fit the unit after the point where drinking water is drawn off, or leave a separate kitchen cold tap on unsoftened water, since softened water is often not recommended for drinking by all manufacturers. Ask where the unit will go and how it will be reached to add salt or service it. Ask for a bypass valve set, so that the unit can be isolated without stopping the supply. Ask where the drain will run, and how it will avoid back flow into the machine. Ask where the power will come from and whether a spur is needed. Ask what the maker says about servicing, and read the instructions yourself.

Once Heat Go learns where the mains enters the home, a softener fitting checklist ruled with rows for site, bypass, drain, power and kitchen tap can follow.

Planning where a water softener or scale reducer goes in a Holloway home

Softener fitting questions in Holloway homes

Holloway flats with a mains entry in a small cupboard

Space is tight. Ask whether a smaller unit would suit.

Holloway homes with the stopcock under the stairs

There may be room. Ask about a drain nearby.

Holloway: households wanting to keep a drinking tap

Ask for a separate unsoftened cold tap.

SettingParking and van accessProperty accessTypical enquiries
Holloway flats with a mains entry in a small cupboardRoadsideKitchenTight cupboards
Holloway homes with the stopcock under the stairsPermit zonesHallStair cupboards
Holloway: households wanting to keep a drinking tapDrives commonUtilityDrinking taps

Show the plumber where the mains enters and ask for the unit’s position, bypass, drain and power to be marked on a sketch. Read the maker’s instructions together.

In a Holloway house, a household decides to fit a water softener after limescale clogs two showerheads. The plumber visits to find where the mains enters, in a cupboard under the stairs, and measures the space. He explains that the unit will need a drain, which can be linked to the waste from the kitchen, with an air gap, and a socket in the cupboard. The household asks about the kitchen cold tap, and the plumber agrees to leave it on the unsoftened supply. A bypass set is fitted, so that the unit can be isolated for a service. The household sticks a note on the cupboard door about topping up the salt, and files the maker’s instructions and a sketch of the pipe positions. After a few months, they notice the showerheads stay clearer for longer.

Limescale is a year-round matter, but a softener is often installed before winter, when heating demand is highest. Check the salt level monthly, and book a service at the interval the maker advises.

Good to know in Holloway

Softener

A unit that swaps the minerals that make water hard for others, so that less limescale forms.

Bypass valve

A valve set that lets water go round a unit so that it can be removed or serviced.

Air gap

A deliberate space in a waste connection that stops used water flowing back.

Questions about plumbing installations in Holloway

01In Holloway, where does a softener go?

On the mains, with room for salt and servicing.

02In Holloway, does it need a drain for plumbing installations?

Usually, for its regeneration water.

03In Holloway, does it need power?

Usually, for its control head.

04In Holloway, what about drinking water?

Ask for a separate unsoftened tap.

05How does Holloway plumbing installations handle a gas smell?

Call 0800 111 999 first, since Holloway plumbing installations must wait, and Holloway plumbing installations carries on later.

Talk to Heat Go

Ask about plumbing installations in Holloway.

Tell Heat Go where the mains enters, and a softener fitting checklist with a row for each requirement will be laid out.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Plumbing installations enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.