Air conditioning installation · Muswell Hill

Air conditioning installation in Muswell Hill: placing an indoor unit above a bed so the airflow cools the room without blowing on the sleeper

A bedroom is the room most people want to cool and the one where bad placement is most noticeable. An indoor unit that points its jet of cold air straight at the pillow is a nuisance in the first hour and a grievance by the third night. A little thought about where the unit hangs, which way the vanes point and how far the air travels will spare a household that. Households in Muswell Hill, with high ceilings and large sash windows, have more choices than they may realise.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Houses in Muswell Hill often have tall bedrooms with a chimney breast, a bay window and a bed placed against the one clear wall. A wall-mounted indoor unit needs a stretch of wall high enough for the air to leave freely, near enough to the outside for the pipe run, and out of the line between the unit and the bed.

The planning covers five areas. The unit’s height, which the maker states, usually near the ceiling with space above for air to enter. The direction of the airflow, which the vanes can change, and the throw of the air in metres. The relationship to the bed, the desk and any seating, since a jet that reaches them is a nuisance. The route of the pipes and the condensate drain through the wall, which in a solid brick house means a hole cut with a core drill. And the controls: a remote, a wall controller or an app, and whether a night setting lowers the fan speed. Ask the installer to stand in the room, point to the proposed position and say where the air will go. If the bed is beneath the likely spot, ask about a different wall, a floor-standing unit or a ceiling cassette. A household may also ask what noise the unit makes at its quietest setting.

Heat Go is on hand to help you plan the room. Describe the bedroom and where the bed stands, and a sheet of points for the installer to weigh up can be drawn up.

Placing an indoor unit in a bedroom in a Muswell Hill house

Bedroom unit placement in different Muswell Hill homes

Muswell Hill houses with a bed against the only clear wall

The unit may sit above the bed. Ask about angling the vanes away or a different position.

Muswell Hill houses with a deep bay window

A unit in the bay is out of the way of the bed. Ask about the pipe route to the outside.

Muswell Hill houses with a tall ceiling and a chimney breast

The unit can sit high but the pipes are long. Ask about the pipe length limit.

SettingParking and van accessProperty accessTypical enquiries
Muswell Hill houses with a bed against the only clear wallRoadsideMain bedroomClear walls
Muswell Hill houses with a deep bay windowDrives commonBay windowBay rooms
Muswell Hill houses with a tall ceiling and a chimney breastPermit zonesSecond bedroomHigh rooms

Show the installer where the bed, the wardrobe and the window stand, and tell them how the room is used day and night.

A household in a Victorian terrace wants cooling for the top-floor bedroom, which gets the afternoon sun. The installer stands in the room with a tape and notes that the only clear wall is the one behind the bed. He suggests the unit on the side wall beside the window, angled so that the air runs along the ceiling and falls gently across the room. He explains the throw distance, the night mode and how the pipes will go through the thick brick wall with a core drill, then be sealed and finished neatly. The household asks about the lowest noise level and writes it down. After the work the installer runs the unit and stands where the pillow will be, and the airflow is barely felt. The household keeps the installer’s sketch of the position and the controller settings.

Planning in late winter leaves time to look at the room in different light and to choose a position before the first warm spell, when installers are busy.

Good to know in Muswell Hill

Throw

The distance a stream of air travels from an indoor unit before it loses its force.

Vane

A movable flap on an indoor unit that directs the airflow up, down or sideways.

Core drill

A rotating tool that cuts a neat round hole through a wall for pipes or cables.

Questions about air conditioning installation in Muswell Hill

01In Muswell Hill, where should an indoor unit go in a bedroom?

High on a wall, away from the line to the bed.

02In Muswell Hill, can the airflow be changed?

Yes. The vanes can be set to direct it up, down or sideways.

03In Muswell Hill, will it be noisy at night?

Ask for the lowest fan noise and a night setting.

04In Muswell Hill, can pipes go through a thick brick wall?

Yes, with a core drill, sealed and made good afterwards.

05In Muswell Hill, what if a gas smell is noticed in the house?

Go outside at once and dial 0800 111 999 as the first call. Air conditioners do not burn gas, so the smell comes from elsewhere.

Talk to Heat Go

Ask about air conditioning installation in Muswell Hill.

Tell Heat Go where the bed stands in your Muswell Hill bedroom, and a brief on unit placement for the installer can be written.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Air conditioning installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.