Finsbury Park flats with a fire labelled unsafe by the engineer
It must stay off. Tell the tenant and arrange the work quickly.
Landlord gas safety certificates · Finsbury Park
A gas check does not always end with a clean record. An engineer may find a flue that is spilling, a hob with a faulty flame device or a fire that cannot be left in use. For a landlord, the finding starts a short chain of duties: stop the appliance being used, put it right and show that it was put right. Landlords in Finsbury Park can plan the chain before they need it.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Large houses in Finsbury Park have been turned into many flats and rooms, often with older appliances that were fitted by earlier owners. Defects are not rare. A tenant may be living in the home when the finding is made, or the home may be empty and about to be let. Either way, the landlord must act, and the record must show it.
There are five stages. First, the engineer explains the defect and what he has done to make the appliance safe, which may be to turn it off and label it. Second, the landlord tells the tenant, in writing, what happened and what happens next, so that nobody uses the appliance. Third, the landlord arranges the repair or replacement promptly and gets a written quote and a date. Fourth, a second visit or a note confirms that the work has been done and the appliance tested. Fifth, the landlord files the original record, the repair invoice and the confirmation together, and gives the tenant a copy. A home should not be let with a defect unresolved. Ask the engineer to say clearly which findings need action now and which are advice.
Tell Heat Go how many appliances the home has, and a checklist for each stage, with room for dates and names, will be set out.
It must stay off. Tell the tenant and arrange the work quickly.
The defect must be cleared first. Delay the move-in if needed.
Everyone is affected. Tell each tenant at once.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Finsbury Park flats with a fire labelled unsafe by the engineer | Roadside | Living room | Labelled appliances |
| Finsbury Park: empty homes about to be let | Permit zones | Kitchen | Void lets |
| Finsbury Park houses with several tenants and one boiler | Drives common | Hall | Shared boilers |
Ask the engineer to write the defect in plain words and say which findings need action now. Give the tenant the engineer’s note and your plan with dates.
During a yearly check on a Finsbury Park flat, the engineer finds that the boiler flue has a loose joint that is leaking a little. He turns the boiler off, labels it and explains why. The landlord writes to the tenant the same evening, offering a heater in the meantime, and books a repair for the next morning. The engineer returns, refits the joint, tests the flue and writes a short note. The landlord files the record, the repair note and the message to the tenant together. Months later, when an agent asks for evidence, the pack tells the full story in order.
A defect found in autumn is urgent, because the heating is about to be needed. Booking checks in late summer leaves a landlord time for repairs before the cold. A defect found in January will meet slower diaries and a tenant without heat, so a plan matters more.
Something wrong or unsafe that an engineer finds in an appliance, a flue or the pipes.
A period when a home is empty between tenancies.
A short written statement from an engineer that a repair has been made and tested.
Not if it has been labelled unsafe.
Promptly, with dates written down.
The engineer who did it, in writing.
No, deal with it first.
Ring 0800 111 999 before anything; meanwhile Finsbury Park landlord gas safety yields to the call, and Finsbury Park landlord gas safety can start again later.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go how many appliances the home has, and a defect follow-up checklist with spaces for dates will be written out.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in Finsbury ParkAll landlord gas safety certificates areas