Heat pump system assessment · Finsbury Park

Heat pump system assessment in Finsbury Park: checking the loft and wall insulation first, since heat that is kept is heat that need not be made

The most useful heat is the heat that does not escape. Before judging a heat pump, an assessor looks at how well the house holds its warmth. A household can do a first check of the loft and the walls and tell him what it finds. Poor insulation may change the size of the unit and the order of work. Households in Finsbury Park can look in the loft and at the walls.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Large Victorian houses in Finsbury Park have lofts with old insulation of varying depth, solid walls without a cavity and sash windows with gaps. Extensions may be better insulated than the original. Rooms under the roof lose heat quickly.

Five checks help. Look in the loft and measure the depth of insulation across the floor, noting gaps, compressed patches and areas left bare round hatches and pipes. Note the type of wall: solid brick, cavity or timber, from its thickness at a window or a door. Look at whether any wall insulation has been added, inside or outside. Check the windows and doors for gaps and the type of glazing. And note any damp or cold patches on walls and ceilings. Photograph each and give them to the assessor. He can estimate the heat loss and advise which measures come first. Never block ventilation or vents.

As soon as you explain the house, Heat Go will draft a short insulation survey sheet for the loft, walls and windows.

Looking over loft and wall insulation ahead of a Finsbury Park heat pump assessment

Insulation survey questions in Finsbury Park houses

Finsbury Park houses with solid brick walls

They lose heat. Ask the assessor about wall insulation.

Finsbury Park: lofts with old, thin insulation

A top-up may help. Measure the depth.

Finsbury Park houses with sash windows

Gaps leak heat. Ask about draught-proofing.

SettingParking and van accessProperty accessTypical enquiries
Finsbury Park houses with solid brick wallsRoadsideLiving roomSolid walls
Finsbury Park: lofts with old, thin insulationDrives commonLoftThin lofts
Finsbury Park houses with sash windowsPermit zonesBay roomSash windows

Give the assessor your measurements and photographs and tell him what has already been done. Show him the loft and the cold rooms.

In a large Finsbury Park house, a household climbs into the loft and finds insulation only a hand deep, with bare patches round the hatch. They note solid brick walls and sash windows with gaps, and a cold back bedroom. They photograph each and measure the depth. The assessor reads the notes, confirms that the loft should be topped up first and advises draught-proofing the sashes, since these changes would reduce the heat the pump must supply. The household does both before the pump is ordered, and the later assessment suggests a smaller unit. The household then arranges a short survey of the loft with a builder who measures the existing depth of insulation and notes gaps around the hatch and the water tank. He photographs the corners where the layer is thin and writes a short description of what could be added. Another builder looks at the cavity in the side wall and the single-glazed windows on the landing. The household keeps both notes with the photographs and a simple table of what each change might involve. When the assessor visits he reads them, and agrees that the order of works is sensible: loft first, windows second, and the pump last. He also notes that the heat loss figure for the house will fall as each change is made, and suggests that the household asks him to revisit the figure after the work. They agree a date for a follow-up conversation in the spring.

Lofts are easy to inspect on a mild, dry day, and draught-proofing is best done before winter. A survey in autumn gives the builders room to finish before deep winter. A winter survey finds cold rooms clearly.

Good to know in Finsbury Park

Solid wall

A wall of brick or stone with no gap or cavity inside it.

Draught-proofing

Closing up draughty gaps at doors, windows and floorboards.

Top-up

Adding more insulation on top of what is already in a loft.

Questions about heat pump system assessment in Finsbury Park

01In Finsbury Park, why check insulation first?

Heat that is kept need not be made.

02In Finsbury Park, what should I measure?

The depth of loft insulation and the gaps.

03In Finsbury Park, can wall insulation help?

Often, so ask the assessor.

04In Finsbury Park, should I block vents?

Never.

05How does Finsbury Park heat pump assessment handle a gas smell?

First, 0800 111 999 is rung; for now, Finsbury Park heat pump assessment is put aside, and Finsbury Park heat pump assessment may resume later.

Talk to Heat Go

Ask about heat pump system assessment in Finsbury Park.

Describe the house to Heat Go, and an insulation survey sheet for the loft, walls and windows will be laid out.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heat pump system assessment enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.