Archway flats with a bedroom unit that restarts at night
The unit may wake the sleeper. Ask whether auto-restart can be turned off.
Air conditioning fault diagnosis · Archway
After a power cut, some units wake up on their own, while others stay off until someone presses a button. Neither is a fault in itself, but a unit that starts at an odd hour can surprise a household, and one that refuses to start can seem broken. The behaviour is set by a setting called auto-restart in many units. Households in Archway can find out what theirs does.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats and terraces in Archway have power cuts, tripped breakers and building works that interrupt the supply from time to time. A unit in a bedroom may start in the night, when the power returns, with the old settings. Another may need a button press, and the household finds a warm room in the morning.
Five checks help. Read the manual to find out whether the unit has an auto-restart setting and how it is turned on or off. Note what the unit did after the last power cut: stayed off, restarted with the old mode or restarted in a default mode. Check the remote’s settings and the unit’s timer, since a timer may restart the unit at a surprising time. Check the clock on the remote, which may have reset to midnight. And note whether the unit restarts correctly each time or only sometimes. If the behaviour does not match the manual, an engineer can check the controls. Write down the date of each cut and what followed.
Heat Go can lay out the five checks as a short list for your unit if you give it the make and what the unit did after the last cut.
The unit may wake the sleeper. Ask whether auto-restart can be turned off.
The room may be warm in the morning. Ask whether auto-restart can be enabled.
A wrong clock on the remote may be starting the unit at odd hours, so set it right and check the times.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Archway flats with a bedroom unit that restarts at night | Roadside | Bedroom | Night restarts |
| Archway flats where the unit stays off after a cut | Permit zones | Living room | No restart |
| Archway homes with a timer set on the remote | Drives common | Hallway | Timer resets |
Show the engineer the remote and its clock, and say what the unit did after the last power cut. Give the make and model so the setting can be checked.
An Archway household has a power cut one night, and the bedroom unit wakes at four in the morning with the cool setting they had used the evening before. They read the manual and find that auto-restart is on. They note the date, switch the setting off as the manual shows, and write the change on a label by the remote. At the next cut, the unit stays off, and they restart it with the remote in the morning. The engineer later confirms the setting and notes the change in the record.
Power cuts are more frequent in storms and in the heavy use of winter evenings, but a unit idle in winter may restart in the first warm week with unexpected settings. A check of the remote and the clock each April is simple. Summer cuts cause the most trouble for units that run all night.
A setting that makes a unit resume running when power returns after a cut.
The mode a unit chooses by itself when it has lost its stored settings.
A feature that switches a unit on or off at times you choose.
Auto-restart may be on after a power cut.
Often yes, as the manual shows.
Auto-restart may be off, or a fault may exist.
Yes, a wrong clock can start a timer at odd times.
Dial 0800 111 999 first, with Archway air conditioning faults must wait, and Archway air conditioning faults stays on hold.
Talk to Heat Go
Say what the unit did after the last cut and Heat Go will turn it into a short list of settings to check.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All air conditioning servicesEvery service in ArchwayAll air conditioning fault diagnosis areas