Flats with an outdoor unit on a balcony rail
The rail can amplify vibration. Ask whether rubber feet or a different mounting would quieten it.
Air conditioning fault diagnosis · Hendon
Air conditioners make sounds: a click as a relay closes, a soft hum as the fan starts, the gurgle of refrigerant settling. Most are ordinary. A rattle that was not there last summer, or a click that repeats without the unit starting, is worth noticing. The sound is a clue, and a good description of it helps an engineer more than the words “it makes a noise”. Residents in Hendon can describe it clearly with a few observations and a phone recording.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Homes near Hendon Central have indoor units fixed to bedroom and living room walls and outdoor units on brackets or balconies. The sound may come from either end, and a hard surface can carry it to the other. A loose panel, a fan blade touching its guard, a worn motor bearing or a relay that keeps trying to close can each produce a different noise. Finding which end it comes from is the first step.
Work through five observations. Does the sound come from the indoor unit, the outdoor unit or both? Find out by standing close to each while the other is quiet, or by asking someone to listen. When does it happen: at start, while running or at shutdown? What does it sound like: a click, a rattle, a hum, a squeal or a knock? Does it change with the fan speed or the mode? And does it come with a fault light or a code? Record it on a phone for thirty seconds and note the date and the weather.
Heat Go can help you describe a sound. Send a recording and your notes, and likely sources can be talked through before a visit is booked.
The rail can amplify vibration. Ask whether rubber feet or a different mounting would quieten it.
A click at start may wake sleepers. Note the time and how it changes with the mode.
Bearings and relays age. Ask the engineer which parts wear first in your make.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with an outdoor unit on a balcony rail | Permit zones | Balcony | Carried vibration |
| Flats with an indoor unit above a bedroom door | Roadside | Bedroom | Night noise |
| Flats with a unit installed many years ago | Drives common | Living room | Older parts |
Give the engineer your recording, the time of day it happens and whether the weather matters. Say which end of the system seems to make the sound.
A resident hears a rattle each time the bedroom unit starts. She stands by the outdoor unit and finds the sound comes from outside, only for the first minute. She records it and notes that it is worse on cold mornings. The engineer finds a fan guard bolt loose, tightens it and checks the bearing, which is sound. The rattle stops. She keeps the recording to compare with future sounds. The engineer adds that a healthy unit’s sound at start-up is worth recording on its own, since a comparison of old and new recordings is the quickest way to hear what has changed. She makes a short recording each spring, and labels the files with the date, so that she has a small library of the unit’s sounds to hand when she calls.
A trial run in spring, with your ears open, finds a new noise before it matters. Record the sound of a healthy unit so you have something to compare.
A small electrical switch that closes to start a motor or compressor and can click as it does.
A part that lets a fan or motor spin smoothly, which can wear and make a squeal or rumble.
The metal grille in front of the outdoor fan, which can vibrate if its fixings loosen.
A single click often is. Repeated clicking without starting is not.
Stand near each in turn, or ask someone to listen outdoors.
It can. Cold often makes a worn part louder.
No. Leave panels and electrics to an engineer.
A recording shows the engineer exactly what you hear.
Talk to Heat Go
Send Heat Go the recording of the noise and your Hendon road, and the likely sources can be talked through.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All air conditioning servicesEvery service in HendonAll air conditioning fault diagnosis areas