Tufnell Park houses where a previous owner set a timer
It may still run. Check the schedule.
Air conditioning fault diagnosis · Tufnell Park
Most of the time, a unit that stops when the room reaches a certain temperature is simply obeying its thermostat. But if it stops long before the chosen temperature, or at a temperature you did not set, something else may be at work. A timer, a sleep setting, an energy-saving feature or a failing sensor may be the cause. Households in Tufnell Park can check each in turn.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Large houses in Tufnell Park have remote controls with many functions, and several people may have touched them. A previous owner may have set a timer, a limit or an economy mode that still applies. A unit that seems to give up at an odd moment may be following instructions nobody remembers.
Five checks help. Read the display and the remote for the set point, and compare it with the temperature at which the unit stops. Look for a timer, sleep or economy symbol on the display and read the manual for what each does. Check the remote’s clock and any scheduled on and off times. Note whether the unit restarts by itself after a time and what the room temperature is then. And reset the remote to default settings, noting what you changed. If the unit still stops at the wrong temperature after these checks, a sensor or control fault may exist. Write the results and tell the engineer.
Heat Go can set out a settings review card with boxes for set point, timer, sleep, economy and clock, given the remote’s make.
It may still run. Check the schedule.
The unit stops early. Read the manual for the symbol.
Schedules fire at odd hours. Reset the clock.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Tufnell Park houses where a previous owner set a timer | Roadside | Study | Old timers |
| Tufnell Park homes with an economy mode switched on | Drives common | Bedroom | Economy mode |
| Tufnell Park: rooms where the remote’s clock is wrong | Permit zones | Drawing room | Wrong clocks |
Give the engineer the settings card and tell him which symbols were on. Show him the remote and what happens when you reset it.
A household in a Tufnell Park house finds that the study unit stops when the room reaches twenty-four, though the set point is twenty-two. They read the manual and find a symbol for economy mode lit on the display. They switch it off and find the unit now runs to twenty-two. They also find that the remote’s clock is five hours wrong and set a sleep timer by accident. They reset the clock, write the settings on a card and test again. The unit works as expected. They tell the engineer, who confirms that no repair is needed, and they file the card. Weeks later, a visitor changes a setting by accident and the unit stops again at an odd temperature. The household checks the card and finds economy mode lit once more, switches it off and carries on. The card has become a small guide for the whole household, and a new housemate is shown it on arrival, which saves a call.
Settings drift when the remote is changed in a hurry or after a battery change, so a check each spring is useful. A reset in April, before the first hot week, avoids confusion. In autumn, a quick check before the winter rest helps next year.
A setting that limits the unit’s power use, often by stopping sooner than the set point.
The times and temperatures a controller works to through the day.
The settings a unit or remote returns to when reset.
An economy mode, timer or sensor may be the cause.
Read the display symbols and the manual.
Yes, noting your settings first.
If the problem remains after the settings are cleared.
Gas smell? Ring 0800 111 999, until then, Tufnell Park air conditioning faults pauses at once, and Tufnell Park air conditioning faults begins again later.
Talk to Heat Go
Tell Heat Go the make of the remote, and a settings review card with a box for each symbol will be set out.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All air conditioning servicesEvery service in Tufnell ParkAll air conditioning fault diagnosis areas