Flats with a single meter
The heat pump shares the meter with everything else. Note any big changes in household habits.
Heat pump maintenance · East Finchley
A heat pump’s electricity use rises and falls with the weather, and a household that keeps an eye on its meter can see when something changes. A pump that is running steadily will use a pattern of power that follows the temperature outside, in a curve that any household can plot on squared paper. A pump with a problem often uses more for the same weather, and the rise can be a sign of a fault, a changed setting or a change in the household. Regular readings, written in a simple table, make that visible. Residents of East Finchley with a heat pump can start the habit today, with a pen, a notebook and a free minute on Sunday morning.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats and small houses in East Finchley that have heat pumps often have a single electricity meter, or a separate one for the heating. A weekly reading takes a minute. Paired with a note of the outdoor temperature, it builds a picture over a winter. Without it, a rise in use may go unnoticed until a bill arrives, by which time the cause may be long forgotten.
The method is simple, and a smartphone camera can take the place of a pen. Read the meter at the same time each week and write the figure with the date. Subtract last week’s figure to find the week’s use. Note the average outside temperature, from a thermometer or a forecast. Over several weeks, the use should follow the temperature: more in colder weeks, less in milder ones, with the occasional exception when guests stay or the washing is heavy. If use rises without a matching fall in temperature, something may have changed, such as a setting, a fault or a change in the household.
A table of readings can be read with Heat Go’s help, and the figures, the dates and a note of the weather are all it needs.
The heat pump shares the meter with everything else. Note any big changes in household habits.
A separate meter gives cleaner figures. Read it weekly.
A smart meter shows daily use. Check how to read it and whether the landlord can see it.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with a single meter | Roadside | Meter cupboard | Shared meters |
| Small houses with a separate heating meter | Roadside | Hall | Separate meters |
| Rented flats with a smart meter | Permit zones | Common stairs | Smart meters |
Show where the meter stands and how it is reached, and leave the table beside it. A meter in a shared cupboard needs a named keyholder.
A tenant-owner reads her meter each Sunday and notes the weather. In January, use is steady and follows the cold. In February it jumps in a mild week. She checks the settings and finds the hot water boost was left on. She switches it off and the next week’s figure returns to the pattern, a result she can see at a glance on her table. She notes what happened on the table, with the date and the cause beside the week, so that the same slip can be recognised next winter.
A winter’s readings tell a story. Starting in October gives a full picture by March and a baseline for next year, when the same weeks can be compared one against another.
The difference between two weekly meter readings, showing the electricity used in the week.
The normal pattern of use for the weather. Departures from it are worth investigating.
A setting that switches on an electric element for faster hot water. Left on, it raises use.
They show whether use follows the weather or drifts, which can reveal a fault or a setting change.
Weekly is enough for most households.
Check settings such as boost and the schedule, and any change in the household, then send the figures to Heat Go for a view.
A rough weekly average is enough. A forecast will do.
A minute a week can show a problem months before it would otherwise be noticed, and the table is a record that a buyer or a landlord may value.
Talk to Heat Go
Heat Go can say whether the pattern looks normal if you send your readings, your notes and your East Finchley street.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in East FinchleyAll heat pump maintenance areas