Blocks with a communal plant room
The contractor keeps records on site. Ask the agent to share them with residents.
Heat pump maintenance · North Finchley
A communal heat pump serves many homes and is looked after by a few people. The residents see the symptoms, the agent holds the contract and the contractor makes the visits, and information can easily fall between them. A shared log, kept in one place and open to all three, closes the gaps. Residents of North Finchley blocks with communal systems can ask for one, or start one, and most agents welcome the offer, since a log saves them time too.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
N12 blocks of flats over shops that have moved to shared heat pumps have a patchwork of ownership and responsibility. The outdoor unit may stand on a roof the freeholder controls, the plant room may be locked and the cylinders may sit in individual flats. A log that records visits, readings, faults and responses gives everyone a common picture, and spares the contractor the questions that residents are tired of answering.
A good shared log has five columns. The date. Who made the entry: resident, agent or contractor. What was noticed or done. Any readings, such as pressure or temperature. And what follows, such as a visit booked or a part ordered. It can be a spreadsheet or a simple document held by the agent. Residents add their observations. The contractor adds visit notes. The agent adds contract and access information. Everyone can see the whole, and a fault that starts in one flat can be matched against what the contractor found in the plant room.
Heat Go can help with the draft of a log and with deciding what goes in it, given the building and the people involved.
The contractor keeps records on site. Ask the agent to share them with residents.
Each flat has its own cylinder settings. Residents can add their own notes.
A management company holds the contract. Ask how residents can see the records.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Blocks with a communal plant room | Permit zones | Plant room | Plant records |
| Blocks with individual cylinders | Roadside | Service cupboards | Cylinder notes |
| Newer buildings with a managed system | Drives common | Common hall | Managed records |
Give a contact number and the times you are in, so that access can be arranged. A plant room or roof that needs a key needs a named holder.
The residents of a block ask the agent for a log. The agent starts a shared document and adds the contractor’s last two visits. A resident notes that her radiators were cold on three mornings in October, and a neighbour adds the same. The contractor reads the notes before the next visit, finds a timer set wrongly and corrects it, and writes what he did. The agent sends the updated log to every flat, so each household can see that the problem was found and fixed.
A log is most useful when started before the cold weather, so that October’s first faults land in a record, and the long dark evenings of December are covered by a history of the autumn.
A single record of observations, readings and actions, open to residents, agent and contractor.
A room housing the main equipment of a communal system.
A short account of a contractor’s visit, with findings and actions.
The agent usually, with entries from residents and the contractor, though a resident volunteer can do it if the agent agrees and has access.
They should be able to, at least by sending them to the agent, who can paste them into the log with the date and the flat number.
Ask the agent to start one, and keep your own in the meantime, in a notebook or a phone note with dates, so that you can add it later.
Yes. It shows patterns, saves repeating the same questions and gives the contractor a starting point before the visit begins.
Keep personal details out. Record only what is relevant to the system.
Talk to Heat Go
A layout for a shared log can be suggested once Heat Go knows your building, who is involved and your North Finchley street.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in North FinchleyAll heat pump maintenance areas