Gas services · Crouch End

Gas services in Crouch End, draught-proofed flats and the air that gas appliances need

Should gas be smelt in Crouch End, people should walk out, leave doors unlocked for the emergency engineer and use the telephone outside to ring 0800 111 999. Nothing else comes first. For calmer days there is a subtler gas safety question, one that lands on people who have done everything right: you have sealed the draughts, and now your appliances may not get enough air.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Crouch End’s Clock Tower of 1895 stands among tall Victorian and Edwardian houses and shops, many with sash windows and floorboards that once let in plenty of air. Owners and tenants have since added draught-proofing, secondary glazing and new doors to cut heating costs. Each improvement is sensible, but together they can remove the leakage that old gas appliances quietly relied on.

Gas appliances need air to burn properly, and they take it from the room around them. A boiler, a hob or a fire that is short of air burns poorly, which can produce carbon monoxide and soot. Ventilators in the wall, air bricks and gaps around doors usually provide the supply. If they are blocked, painted over or sealed, the appliance may struggle. A safety check includes the ventilation for exactly this reason.

Heat Go can explain what a check of ventilation involves, how to tell whether draught-proofing has gone too far and what to do about it. Work on gas appliances is for engineers with Gas Safe registration. Say what you have changed in the home, and a reply can start from there, with the questions an engineer would ask first.

Checking air supply for gas appliances in a Crouch End flat

Air and gas in different Crouch End homes

Flats with sealed sash windows

Secondary glazing and strips cut draughts, and may also cut the air that appliances use.

Kitchens with extractors

A strong extractor can draw air from a boiler or hob, so ventilation must be adequate.

Large family houses

More rooms and more appliances mean more places to check air supply.

SettingParking and van accessProperty accessTypical enquiries
Flats with sealed sash windowsPermit zonesLiving roomSealed windows.
Kitchens with extractorsRoadsideKitchenExtractors.
Large family housesDrives commonUtility roomMany appliances.

The Clock Tower is the landmark everyone uses. For the gas visit, mention which windows have been sealed or double-glazed and where the appliances sit, and say if any extractor was added when the kitchen was refitted.

A couple in a first-floor flat have fitted brush strips to every sash window and filled the gaps beside the front door. Within weeks the hob flame looks lazier and the boiler cupboard smells faintly of warm dust. They photograph the flames, write down the dates of the work and ask Heat Go whether the sealing could be to blame. A registered engineer can then look at the air supply.

Draught-proofing is usually done in autumn. That is also the time to check that the work has not starved an appliance of air. A good rule is that any home improvement that makes the house tighter should be followed by a look at the vents, and by a fresh test of the alarm. Tenants should tell the landlord before sealing anything, since the vents and appliances are the landlord’s responsibility.

Good to know in Crouch End

Ventilators

Vents are there for a reason. Do not block, paint over or cover them without advice from a registered engineer.

Extractors

A powerful extractor in a tightly sealed kitchen can pull fumes back down a flue. Say so if you have one.

Symptoms

Headaches, nausea or drowsiness that ease when you leave the home can be a sign of carbon monoxide. Leave the building and seek advice.

Questions about gas services in Crouch End

01Can draught-proofing cause a gas problem?

It can, if it removes air that an appliance needs. A check will tell.

02Should I remove all my draught strips?

No. An engineer can say what is needed near the appliances.

03Why does the hob flame look lazy?

Poor air supply is one possible cause. Have the appliance checked.

04Where does an appliance get its air?

From vents, air bricks and gaps in the structure. Each should be clear.

05What should happen the moment gas is smelt?

Get outside, give others a warning if that is safe, and then ring the emergency line, 0800 111 999.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about gas services in Crouch End.

List the draught-proofing you have done, the appliances in your home and your road in Crouch End.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Gas services enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.