Rooms with a radiator beside an open chimney
Cold air draws down the flue. Ask about a chimney cap or balloon, with ventilation as advised.
Thermostats & heating controls · Crouch End
A thermostatic radiator valve decides how hot a radiator becomes by sensing the air round it. Place it beside a cold chimney breast, in the draught of a window or under a curtain, and it senses the wrong air. It then opens too wide or closes too soon. The room is too hot or too cold. A small change, such as a remote sensor or a different setting, often cures it. Households in Crouch End, in rooms with chimney breasts, can understand how it works.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Many rooms in Crouch End Victorian houses have a radiator beside the chimney breast, which can be colder than the rest of the room, particularly when the flue is open. The valve head, on the side of the radiator, senses that cold surface and opens fully. The radiator then runs hot, and the room overheats. A head under a heavy curtain, or behind furniture, senses warm trapped air and closes too early.
To check, feel the air round the valve head with the back of a hand: is it colder or warmer than the room? Compare the radiator’s warmth at the top and the bottom. Look at where the head sits, and whether the pipe comes up through a cold floor. Try the setting one step lower and see whether the room settles. If the head is badly placed, ask the installer about a remote sensor, which reads the room’s air from a better spot, or a different type of valve. Keep curtains and furniture clear.
Heat Go can look at the valve with you. Tell us where the radiator and valve are, and the likely cause and fix can be suggested.
Cold air draws down the flue. Ask about a chimney cap or balloon, with ventilation as advised.
The head senses trapped heat. Hold curtains back or shorten them.
The air is stale and warm. Move the sofa or fit a remote sensor.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Rooms with a radiator beside an open chimney | Roadside | Front room | Cold chimneys |
| Rooms with a heavy curtain over the radiator | Drives common | Bedroom | Curtain heat |
| Rooms with the valve behind a sofa | Permit zones | Living room | Hidden heads |
Tell the installer where the valve sits and which rooms overheat or stay cold. Show them the curtains and the furniture near the radiator.
A household finds the front room overheats in the evenings. The radiator sits beside the chimney breast, and the valve head is on the cold side. They feel the air near the head and find it cooler than the room. They lower the setting by two steps and the room settles. The installer later offers a remote sensor on the opposite wall, and fits it. The room now holds its temperature, and the household notes the settings. The installer adds that remote sensors are cheap and quickly fitted, and that the household can move the sensor if the layout of the room changes. They keep the sensor’s cable tidy with a few clips, and note the date of the change in the folder with the valve’s paperwork. A friend with a similar room tries the idea and finds that it works for her too.
Valve settings are easiest to adjust when the first cold evenings arrive, so a trial in early autumn is useful.
The cap on a thermostatic valve that senses the room’s warmth and moves the pin.
A temperature sensor on a short cable that lets a valve read the air at a better point.
The part of a wall that projects into a room and contains a chimney flue.
The valve may be sensing a colder spot than the room.
A remote sensor can read from a better position.
Yes. Trapped heat makes the head close too soon.
Start with a middle number and adjust one step at a time.
Only with a proper device, plus the ventilation the installer advises.
Talk to Heat Go
Tell Heat Go where your radiator and valve are, naming your Crouch End street, and the likely cause and fix can be suggested.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All central heating servicesEvery service in Crouch EndAll thermostats & heating controls areas