Houses with a boiler on the party wall side
The flue and pipes are fixed. Ask the fitter to plan units round them rather than moving them.
Boiler replacement · Crouch End
A kitchen refit and a boiler swap often happen in the same year. Done in the wrong order, the new units can box in the boiler, or the boiler goes in just before a wall is moved. Done in the right order, each trade works once. A short conversation between the kitchen fitter and the heating installer saves a good deal of rework. Households in Crouch End planning both can arrange it.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Crouch End often have a boiler on a kitchen wall, with a flue to the outside and pipes running behind the units. Fitted kitchens add wall units, worktops and boxing. The boiler needs clear space round it for servicing and a cupboard that allows air to circulate. The pipes need to be in the right place before the units are fixed.
Five things need settling. The kitchen plan, with the boiler’s position and any cupboard drawn to scale. The clearances the maker requires round the boiler. The order of the work: first-fix plumbing, then units, then the boiler, or the other way round. The routes for pipes, the flue and the condensate. And the access for a service visit, including a place to stand. Ask both trades to look at the same drawing, and ask for any change to be recorded on it. If the boiler is to be boxed in, ask the installer to confirm the maker allows it.
Heat Go can help you coordinate. Send the kitchen plan and the boiler position, and a short list of queries for both trades can be prepared.
The flue and pipes are fixed. Ask the fitter to plan units round them rather than moving them.
A cupboard needs ventilation and access. Ask the maker’s rules for each.
The boiler may need to move twice. Ask whether one move can serve both stages.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a boiler on the party wall side | Roadside | Kitchen | Fixed positions |
| Houses where the boiler moves to a cupboard | Drives common | Cupboard | Boxed-in boilers |
| Houses with an extension planned | Permit zones | Rear extension | Staged works |
Tell the installer the date the kitchen fitter starts, who is organising the trades and where the new units will go. Share any delivery dates for the units too, because a late delivery can change which trade should go first.
A household in a terrace plans a new kitchen and a new boiler. The installer sees the plan and notes that a tall unit would box in the flue. The fitter agrees to move it a hand’s width. The heating pipes are run before the units arrive, the boiler is hung after the wall units are in and the cupboard door is made removable. When the first service falls due, the engineer can reach the front panel without taking a unit apart, and nobody has to unscrew a worktop to see the pressure gauge.
Refits often run in late summer and autumn, and that is when pipes must be settled first. A swap planned alongside leaves the new kitchen intact for the winter, with no builder returning in January to cut a hole in a finished worktop or to re-tile a wall that has only just been grouted.
The stage of building work in which pipes and cables are run before walls and units are finished.
The space the maker requires to be kept free around a boiler.
Enclosing a boiler or its pipes in a unit or panel.
Only if the maker allows it and access is kept.
The installer, with the kitchen fitter, on one drawing.
Pipes first, units next, boiler last, in most cases.
Ask whether it can be moved once, at the end of the extension.
Yes, if space is left in front and the cupboard is easy to open.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Send Heat Go your Crouch End kitchen plan with the boiler position marked, and a short list of queries for both trades can be prepared.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in Crouch EndAll boiler replacement areas