Houses with an older consumer unit
A trip can take out the boiler circuit. Check the unit and tell the engineer what you find.
Boiler repairs · Crouch End
A power cut can leave a boiler dead, flashing or locked out when the supply returns. Most of the time a reset is all that is needed. If it is not, the first thing an engineer will ask is what the boiler displayed and when. A household that has photographed the screen and noted the time already has the answer. Households in Crouch End can follow a very short routine after any cut.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Crouch End often have older consumer units, extra sockets and a boiler fed from a fused spur. When power returns, a surge or a weak connection can leave the boiler confused. Some boilers lose their time and temperature settings. Others show a code that clears when reset. A few do not recover and need a visit.
The routine runs to five steps. Photograph the display exactly as it appears, including any code. Write down the time the power returned and what you did. Check that the programmer is showing the right time and the thermostat is set. Press the reset button once, following the booklet, and note whether the code clears. And if it comes back, photograph it again and call an engineer. Do not keep pressing reset, because repeated attempts can lock the boiler or disguise a developing fault. Switching the fused spur off and on once can help, but a household should leave anything inside the boiler casing alone.
Heat Go can help you report the fault. Describe what the display showed when the power came back, and a brief for your engineer can be put together.
A trip can take out the boiler circuit. Check the unit and tell the engineer what you find.
Switching the spur off and on once may clear a fault. Do it once only.
New circuits may have changed the supply. Tell the engineer what was done.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with an older consumer unit | Roadside | Hallway | Old fuse boards |
| Houses with a boiler on a fused spur | Drives common | Kitchen | Spur switches |
| Houses where building work was recent | Permit zones | Extension | Recent works |
Give the engineer the photographs, the time of the cut and the time of any resets. Say whether other appliances also failed, and whether any lights flickered as the supply returned. Those small details help to separate a boiler fault from a wiring one.
A household in a terraced house loses power for an hour on a wet evening. When it returns the boiler shows a flashing code. They photograph it, note the time and press reset once. It clears, but the clock is wrong, so they reset the programmer. The next morning the code returns. They send the photographs to the engineer, who recognises the code and brings the right part. The repair takes less time, and the notes are filed with the boiler papers. The household also writes the code and the date on the card beside the boiler, so the next time it appears nobody has to search for the booklet.
Power cuts often come with storms in autumn and winter, so a short routine written on a card near the boiler is worth making before then. Add the engineer’s number and the date of the last service, so anyone in the house can follow it in the dark.
A switched, fused socket outlet that feeds an appliance such as a boiler.
A button or sequence that clears a fault and restarts the boiler once.
The control that sets the times at which heating and hot water run.
A surge or a weak connection can upset its controls.
Once. Repeated attempts can hide a fault.
The display, any code and the programmer.
If the code returns or the boiler does not restart, yes.
Open a window if you can, leave the house and phone 0800 111 999 first. A gas emergency is never a matter for the enquiry form.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go what your Crouch End boiler displayed after the cut, and a brief for the visiting engineer can be drafted.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in Crouch EndAll boiler repairs areas