Crouch End: households with early starters
The morning peak is early. Set the heating period for the small hours.
Heat pump controls & optimisation · Crouch End
A heat pump heats the cylinder slowly, so the time it starts matters. If the schedule is set for a time that suits the machine and not the household, showers are lukewarm. If it is set to heat just before everyone gets up, the machine works hard for a short period. A schedule that reflects the household’s real day makes a quiet difference. Households in Crouch End can map their day and set the controller to match it.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Crouch End have households with different patterns: early starters, late workers, children’s baths and weekend lie-ins. The controller allows one or two heating periods a day for the cylinder and sometimes a weekly boost.
For heat pump controls in Crouch End, the method has five steps. Write down when hot water is used in a typical weekday and weekend: showers, baths, dishwasher and washing. Estimate the total volume against the cylinder’s size from the booklet. Set the heating period to finish an hour before the heaviest use, so the water is fully hot then. Use a second period if there is a second peak. Check the cylinder temperature on the display at the heaviest use time, and adjust by half an hour at a time. Ask the engineer about any weekly boost that raises the water to a higher temperature for hygiene. Keep a note of each change and the date.
Heat Go is ready to help you map it. Tell us the household’s day, and a one-page schedule sheet can be written.
The morning peak is early. Set the heating period for the small hours.
A second peak occurs. Add a late afternoon period.
Use is spread across the day. A midday period may help.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Crouch End: households with early starters | Roadside | Bathroom | Early showers |
| Crouch End: households with children’s baths in the evening | Drives common | Family bathroom | Evening baths |
| Crouch End: households working from home | Permit zones | Study | Daytime use |
Give the engineer the schedule you have tried, the cylinder temperatures at peak times and the household’s pattern of use.
A household in a terrace writes down when they use hot water: two showers at seven, a dishwasher at nine in the evening and baths for the children at half past six. The cylinder was set to heat at two in the afternoon, which finished too early and cooled. They move the first period to four in the morning, finishing before the showers, and add a short one at three for the baths. They check the display at seven and at half past six, find it hot, and write the times on a card. When the engineer calls for the service he approves the schedule and mentions the weekly boost, which they have set for Sunday night. A fortnight later the household notices that the first morning shower is hotter than the evening bath, and they ask the engineer whether the second period can be shortened. He agrees, explains the effect on the cylinder temperature and updates the card. The family adds the weekly boost date to the kitchen calendar so that nobody has to remember it.
A new schedule is easiest to test in autumn, when the household is back into routine and demand is regular.
The time window in which the system heats the hot water cylinder.
A short period of heating to a higher temperature, used for hygiene or a heavy day.
The time when the most hot water is drawn.
Heat pumps heat water slowly, so timing affects when it is hot.
Note when water is used and finish an hour before.
Often, on a controller that allows it.
A periodic higher-temperature heating. Ask the engineer.
In Crouch End, get everyone outside, leave heat pump controls till later; 0800 111 999 first, Crouch End switches and flames must stay untouched.
Talk to Heat Go
Tell Heat Go the household’s day in your Crouch End house, and a one-page schedule sheet can be written.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in Crouch EndAll heat pump controls & optimisation areas