Flats with a kitchen cupboard
A kitchen cupboard shares a wall with the sink, which helps the condensate. Check clearances.
Boiler installation · North Finchley
Many flats above shops keep the boiler in a cupboard off the kitchen or the landing. A new boiler must fit that cupboard, and the cupboard must meet the maker’s rules on space and ventilation. A mismatch means the boiler cannot be fitted as planned, or must be moved, and by then the old one may already be on its way to the tip. Residents of North Finchley can avoid surprises by measuring the cupboard and reading the manual before choosing.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats above the shops of N12 come in many sizes, and so do the cupboards that house their boilers. Most were built for a different generation of boiler, bulkier or smaller than today’s, and they may be lined with timber or stacked with household items. A delivery on a busy road has to be arranged around loading rules, which is worth bearing in mind.
Three details matter. Space: the boiler’s dimensions plus the clearances the maker requires on every side. Ventilation: some boilers in cupboards need air vents to the room or outside, others are designed to run without. Condensate: the pipe from the boiler must reach a waste, and where it passes outside it needs protection from frost. A measuring tape, a photograph of the cupboard and a copy of the manual for the chosen boiler settle most of these, usually before anyone has to visit.
Measurements and photographs let Heat Go compare the cupboard’s size with the boiler’s requirements. Say who owns the flat and whether the cupboard is shared, and the conversation can cover consent.
A kitchen cupboard shares a wall with the sink, which helps the condensate. Check clearances.
A landing cupboard may be far from a waste. The condensate pipe may need pumping.
A service cupboard may be shared. Ask who owns it and who has the key.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with a kitchen cupboard | Permit zones | Kitchen | Sink wastes |
| Flats with a landing cupboard | Roadside | Landing | Distant wastes |
| Newer flats with service cupboards | Drives common | Service cupboard | Shared cupboards |
Boilers are heavy, so describe the stairs, any lift and the place where a delivery can be left. The floor of the flat is the first thing to mention.
An owner of a flat above a shop is told that her new boiler needs more clearance than the cupboard allows. She measures it and finds it is five centimetres short on one side. She sends the measurements and the manual to Heat Go and learns that a slimmer model, or a shifted shelf, would solve the problem. She tells the agent and proceeds.
Boiler installations are easier to schedule before the cold, when residents can manage without heating for a short time. Consents take time, so ask early, and expect a freeholder to want drawings or the maker’s data sheet, and perhaps the installer’s name.
Space around the boiler required by the maker, for ventilation and servicing.
Air supply to a cupboard. Check what the maker specifies for your boiler.
A small pump that moves condensate to a distant waste.
Not necessarily. Check the dimensions and clearances, and remember that the pipes and valves underneath take up room that is easy to forget when measuring.
Some do and some do not. Check the manual for the model you intend to buy, and note any vent already cut into the door or wall.
A condensate pump may be needed, and it needs a power supply and an overflow route, which should be planned with the rest of the work.
Often yes, from the freeholder, particularly if the flue, the pipes or the cupboard change. Ask in writing before ordering.
Yes. Record the height, width and depth, and photograph it empty with the door open, so that an installer can compare it with the maker’s drawings.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Heat Go can check the chosen boiler against the space once it has the measurements, a photograph and your North Finchley road.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in North FinchleyAll boiler installation areas