Flats with a wall programmer
The tenant can usually set the times. Ask for the manual and keep a copy.
Thermostats & heating controls · North Finchley
In a rented flat the heating controls belong to the landlord but are used by the tenant, and the line between what may be adjusted and what may not is often unclear. A tenant who changes settings freely may be told off for it, and one who touches nothing may suffer needlessly. A little clarity helps both. Residents of North Finchley can find the answers in the tenancy and a short conversation.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats above shops cluster round the main N12 crossroads, and their heating arrangements run from old to new. Some flats have a programmer on the wall, others have only a dial on the boiler, and some use controls shared with other flats. Many residents commute, since West Finchley and Woodside Park stations are close enough to reach, so the timing of the heating matters.
Three tiers help. Everyday settings, such as the time the heating comes on and the room temperature, are the tenant’s to adjust within what the system can do. Changes to the equipment, such as replacing a thermostat or adding smart controls, need the landlord’s consent. Safety-related settings, on the boiler itself, should be left to an engineer, and a tenant should say so if a dial seems to have been moved by someone else. A written note from the landlord on what is allowed prevents confusion, and it can be as short as two lines in an email.
Heat Go can suggest how to put a request for a control change to a landlord, and what to say about a faulty thermostat or programmer. Describe what you have and what you want, and the wording can be sketched.
The tenant can usually set the times. Ask for the manual and keep a copy.
Controls on the boiler itself are harder to reach. Mark the settings you change.
Controls may belong to the building. Ask the agent what a tenant may do.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with a wall programmer | Permit zones | Hallway | Timer settings |
| Flats with boiler-mounted controls | Roadside | Kitchen | Boiler dials |
| Flats served by a communal plant | Drives common | Common hall | Shared controls |
State the floor and the bell, offer times for access and say where the controls and the boiler are. A cupboard kept locked needs a named keyholder.
A tenant finds the heating comes on at five in the morning and goes off before she returns from work. She photographs the programmer and reads its manual, and learns that the times can be changed. She sets them to suit her day and notes the change. A month later the thermostat sticks. She emails the agent with a photograph and a request for a replacement, and the agent agrees.
Settings changed before winter are a small kindness to yourself. A tenant who adjusts the times in September is less likely to be caught out by the first cold snap, and a landlord who has been asked about a faulty control early has time to act.
Times and temperatures are normally the tenant’s to adjust.
Adding or replacing devices usually needs the landlord’s written consent.
A copy of the controls guide lets the tenant use the system properly.
Usually yes, within what the system allows.
Only with the landlord’s consent, and the model has to suit the boiler. Put the request in writing, name the device and offer to restore the old control when the tenancy ends.
Report it in writing, with a photograph and a description of what it does, such as switching the boiler on and off at odd times, so that the agent can act on it.
The landlord or agent, in most cases, and a tenant is entitled to ask to see it.
Yes, so they can be restored if needed. A photograph of the display before you change anything, kept with the date, takes seconds and removes any argument later.
Talk to Heat Go
Heat Go can help draft a request to your landlord once it knows what controls your flat has, what you would like to change and your North Finchley road.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All central heating servicesEvery service in North FinchleyAll thermostats & heating controls areas