Front-elevation units
Moving a unit to the rear improves the look but needs longer pipes.
Refrigerant-related work · Palmers Green
People often want to move an air conditioner: to a different room, to the back of the house or out of sight of the street. It sounds like a plumber’s job, but it involves recovering the refrigerant, altering the pipes and recharging the system, and each step needs a certified person. Planning it properly saves a poor result.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Palmers Green’s Edwardian houses have thick walls, high ceilings and a front elevation that owners value. When a unit installed in a hurry looks wrong on the front, or a loft conversion needs the indoor unit moved, the refrigerant circuit has to be opened. The pipes may have to be shortened, lengthened or rerouted, with new joints made and the system tested.
A careful relocation begins with a plan: the new position, the pipe route, the drain and the power, drawn on a sketch that everyone involved can see. Then the gas is recovered from the old circuit into a cylinder, the units are moved, pipes altered, the system pressure-tested and evacuated, and the gas is returned or replaced. Skipping steps leaves moisture or air in the system, and shortens the unit’s life, so a quote that seems to leave out recovery or testing deserves a question.
Heat Go can talk through what moving a unit involves, what to prepare and what to ask the certified technician. Share photographs of the current and proposed positions and the route the pipes would take, and the reply can set out the main steps and questions.
Moving a unit to the rear improves the look but needs longer pipes.
A new room may need the indoor unit moved or a new one added.
Shared walls and roofs limit where units can go, so ask the owners.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Front-elevation units | On-street | Front wall | Pipe length. |
| Loft conversions | Drives common | Landing | Relocation. |
| Converted flats | Check signs | Hall | Consent. |
Green Lanes with its shops and buses is the main road through Palmers Green, and the park is a short walk away. For a relocation survey, show the current positions, the new ones and the walls the pipes would cross.
A couple find that the outdoor unit on the front wall of their house draws the eye from the street, and that their neighbours have hidden theirs round the side. They photograph it, sketch a route round the side to the rear garden and measure the distance, which is longer than the existing pipes. A conversation about extending the pipes, recovering the gas and testing the system can start from that sketch.
Moves are best planned outside the hot weeks, when the system can sit idle for a short while. Early spring suits.
Pumping down moves the refrigerant into the outdoor unit or a cylinder so the pipes can be disconnected safely.
After pipes are altered, air and moisture are removed with a vacuum pump. Skipping it shortens the life of the system.
Houses on the Palmers Green estates repeat their layouts, so a neighbour’s relocation may show what works.
No. Opening the refrigerant circuit needs certification, and a poor job damages the system. Even disconnecting the pipes without recovering the gas first would release it, which is not permitted.
Often, when moving a unit, since the new position may be further from the old. Extra pipe length may affect the charge, so it must be calculated, and the maker’s limits on length and height difference must be respected.
It removes air and moisture, which would harm the compressor and reduce efficiency.
Sometimes, if it is clean and recovered properly. The technician will advise, and may prefer to use a fresh charge for the best performance.
It depends on the job, so no time can be promised. Describe the plan, say how far the units are moving and whether walls must be drilled, and a more specific answer can follow.
Talk to Heat Go
Photographs of the current and new positions and the pipe route, plus your Palmers Green street, open the conversation well.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All air conditioning servicesEvery service in Palmers GreenAll refrigerant-related work areas