Homes with a unit more than fifteen years old
The refrigerant may be an older type. Ask the engineer what that means for repairs.
Refrigerant-related work · Edgware
On the side of every outdoor unit is a label, and on that label is a line naming the refrigerant the system holds. It looks like a code, such as R410A or R32, and it matters. Different refrigerants behave differently, need different handling and may affect which repairs are possible. A householder who can read the label can tell an engineer in a sentence what they are dealing with. Households in Edgware can find it in a minute.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Air conditioners in Edgware homes were fitted over many years, and the refrigerant varies with the age of the unit. Older ones may use refrigerants that are being phased out, so topping up may be harder or impossible. Newer ones use different types, each with its own pressure and safety characteristics. The label also gives the charge amount, the model and the serial number.
Reading the label is simple. Find the plate on the outdoor unit, usually on the side or back. Look for the lines giving the model, the serial number, the refrigerant type and the charge in kilograms or grams. Photograph the label in good light. Note where it is, in case it fades or becomes hard to read. Share the details with the engineer before the visit. Do not open any part of the unit, and do not try to find the refrigerant fittings.
Heat Go can help you read a label. Send a photograph, and a plain note of what each line means can be offered.
The refrigerant may be an older type. Ask the engineer what that means for repairs.
Newer refrigerants have their own handling needs. Ask the engineer what is different.
A label that cannot be read is a nuisance. Photograph it now and ask for a replacement label if needed.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Homes with a unit more than fifteen years old | Roadside | Garden | Older refrigerants |
| Homes with a unit fitted in the last few years | Drives common | Side wall | Newer types |
| Homes with a faded or damaged label | Permit zones | Rear wall | Worn labels |
Give the engineer the photograph of the label and the unit’s age. Tell them of any repairs that were done before.
A couple photograph the label on their outdoor unit and send it to the engineer before his visit. It shows an older refrigerant. He explains that top-ups of that type are restricted and that a repair will focus on finding and sealing a leak, not on adding gas. He brings the right equipment and finds a leaking valve. The label photograph stays in the folder for next time. The engineer also explains that older units of that type are often repaired by finding and sealing the leak, and that where parts or refrigerant are scarce the cost of repair may be weighed against replacement. He gives the couple an honest account of both options, and they decide to repair now and plan replacement in a few years. The label photograph helps the next engineer, who can arrive prepared with the right gauges. The couple write the unit’s age on the same page. They also note the date of the next leak check.
A label check is quick and best done in spring, so that any repair planning is complete before the heat arrives.
The specific compound a system uses, shown on the label as a code such as R32.
The amount of refrigerant a system holds, given on the label in kilograms or grams.
The label on a unit that gives its model, serial number and technical details.
It names the refrigerant the system holds.
Different types are handled differently and may limit the repairs.
No. That belongs to a competent engineer.
Tell the engineer, and ask for the details from the manual.
Yes, with the manual and the logbook.
Talk to Heat Go
Send Heat Go a photograph of the label on your outdoor unit with your Edgware road, and a plain note of what each line means can be offered.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All air conditioning servicesEvery service in EdgwareAll refrigerant-related work areas