Refrigerant-related work · Holloway

Refrigerant-related work in Holloway: reusing old pipework with a new unit and what must be checked before the old pipes are trusted

Replacing an air conditioner often tempts the household to keep the old pipes in the wall and save the mess of new ones. Sometimes that is sensible, and sometimes it is not. The pipes may be the wrong size, hold old oil or have a weak joint, and the new unit may use a different refrigerant from the old. A wrong choice shows up as a fault in a year. Households in Holloway can ask what has been checked.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Many flats in Holloway have pipes hidden behind trunking or inside a wall chase, fitted by a previous owner. Nobody remembers the pipe size, the date or the test. The new unit’s maker has its own rules on reuse, and the old pipes may not meet them.

Five questions help. What size and length are the pipes, and do they match the new unit’s requirements in its installation guide. What refrigerant did the old unit use and what does the new one use, since some combinations cannot share old pipes. What is the condition of the pipes and insulation: kinks, damage, corrosion and signs of oil. Will the pipes be pressure tested with nitrogen and flushed, and will the result be recorded. And what does the maker say about reuse. Ask the installer to answer in writing. If any doubt remains, new pipes are the safer choice. A record of the decision protects the household.

Give Heat Go the old and new makes and the length of the pipe run, and a short list of questions on reusing old pipes will be drafted.

Deciding whether to reuse old pipework with a new air conditioner in a Holloway flat

Pipe reuse questions in Holloway flats

Holloway flats with pipes behind trunking

They cannot be seen. Ask for a test before reuse.

Holloway homes with an old unit on a different refrigerant

Sharing may not be allowed. Ask for the maker’s rule.

Holloway: rooms where the pipe run is long

Size and length matter. Compare with the guide.

SettingParking and van accessProperty accessTypical enquiries
Holloway flats with pipes behind trunkingRoadsideBedroomHidden pipes
Holloway homes with an old unit on a different refrigerantPermit zonesLiving roomDifferent refrigerants
Holloway: rooms where the pipe run is longDrives commonHallLong runs

Let the installer see the old unit’s label and the new unit’s guide, and take him along the pipe run yourself. Mention anything you know about the pipes’ age.

A household in a Holloway flat replaces an old unit and asks the installer whether the pipes can stay. He looks at the old label, sees a refrigerant that the new unit does not use, and checks the maker’s guide, which says the pipes must be flushed and tested. He finds the pipe size slightly wrong and recommends new pipes through the same trunking. The old ones are removed and capped, and the new ones are pressure tested with nitrogen. He records his reasons and the test result. The household files his note with the new unit’s record. A year later, the unit runs well, and the household’s record of the pipe test and the maker’s rule is passed to the next owner of the flat. The installer’s written reasons for choosing new pipes are kept with the data sheet. The household finds that the decision, made carefully at the start, caused no worry afterwards.

Replacements are often done in spring, ahead of summer, when pipe questions are easy to settle. A rushed summer swap may reuse pipes without a proper test. A record of the decision helps if a fault appears later. A replacement in spring leaves time for a proper pipe test before the summer. A rushed fit in a heatwave may skip the flush. Keep the record of the test and the maker’s rule with the unit’s papers.

Good to know in Holloway

Flushing

Cleaning the inside of pipes with a fluid or gas to remove oil and debris before they are reused.

Refrigerant type

The kind of refrigerant a unit is designed to use, shown on its label.

Trunking

A plastic cover that hides pipes or cables along a wall.

Questions about refrigerant-related work in Holloway

01In Holloway, can old pipes be reused?

Sometimes, if size, type and condition suit the new unit.

02In Holloway, what must be checked?

Size, refrigerant type, condition, test and the maker’s rule.

03In Holloway, who decides?

The installer, with the maker’s guide.

04In Holloway, should I see the reasons?

Yes, in writing.

05refrigerant work: gas smelt in Holloway?

Phone 0800 111 999 first; with Holloway refrigerant work must wait, and Holloway refrigerant work can restart later.

Talk to Heat Go

Ask about refrigerant-related work in Holloway.

Give Heat Go the two makes and the pipe length, and a question list on reuse will be drafted for the installer.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Refrigerant-related work enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.