Cooker & hob installation · Tufnell Park

Cooker and hob installation in Tufnell Park: a flexible hose or a rigid pipe for a gas cooker and what is allowed for a built-in hob

The last link between a gas pipe and a cooker is a short connection, and it comes in two main kinds. A freestanding cooker that must be pulled out for cleaning uses a flexible hose with a bayonet fitting. A built-in hob in a worktop is normally joined by a rigid or semi-rigid connection, since it does not move. Using the wrong kind causes trouble. Households in Tufnell Park can ask which is right for their appliance.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Large kitchens in Tufnell Park have a mix of freestanding ranges and built-in hobs, and many have been changed several times. A hose may remain from an older cooker, hidden behind a new unit, and a rigid pipe may run to a point that no longer suits. The type and age of the connection are rarely recorded.

Five points help. Which connection the maker’s instructions require for the model, since they differ. For a freestanding cooker, a hose of the correct type, length and marking, with a bayonet fitting and a stability fixing. For a built-in hob, a rigid or semi-rigid pipe or a suitable approved flexible connector, fitted so that it is not strained by drawers or shelves. The position of the isolation valve for cooker and hob installation, which must be accessible. And a leak test after the connection, with the result noted. Ask the installer to say what he is fitting and why. Replace old hoses on a freestanding cooker at the recommended intervals and note the date.

Tell Heat Go the make and whether the cooker is built in or freestanding, and a short card of connection questions will be written.

Choosing a hose or rigid connection for a gas cooker or hob in a Tufnell Park kitchen

Connection questions in Tufnell Park kitchens

Tufnell Park: kitchens with a freestanding range

It will be moved for cleaning. Ask for a proper hose and a stability fixing.

Tufnell Park: kitchens with a built-in hob over drawers

Drawers may strain a hose. Ask for a rigid connection.

Tufnell Park homes with an old hose behind a new unit

Its age is unknown. Ask for it to be checked or replaced.

SettingParking and van accessProperty accessTypical enquiries
Tufnell Park: kitchens with a freestanding rangeRoadsideKitchenFreestanding ranges
Tufnell Park: kitchens with a built-in hob over drawersDrives commonBack kitchenDrawer units
Tufnell Park homes with an old hose behind a new unitPermit zonesHallOld hoses

Show the installer the cooker or hob, the gas point and the space behind. Tell him how old any existing hose is and whether the appliance is moved.

A household in a large Tufnell Park kitchen replaces a built-in hob that had been connected with a long flexible hose coiled in a drawer. The installer explains that this is not suitable, since drawers can strain it. He fits a rigid connection from a point at the back of the unit and an isolation valve in the cupboard, and tests the joints with a detector. He writes the type of connection and the result on the record. The household learns that a freestanding range elsewhere uses a hose and checks its date, finding it nearly due for replacement. Both notes go into the folder.

A hob connection is made once, at fitting, so planning ahead is the key. A hose on a freestanding cooker should be checked each autumn, before heavy winter use. Note the date of each replacement.

Good to know in Tufnell Park

Bayonet fitting

A quick-release gas fitting on the wall into which a cooker’s hose pushes and locks with a twist.

Rigid connection

A fixed length of metal pipe joining a gas supply to an appliance.

Leak test

A check, often with a detector or a gauge, that a gas joint does not leak.

Questions about cooker & hob installation in Tufnell Park

01In Tufnell Park, which connection should I use?

The one the maker requires for the model.

02In Tufnell Park, can a built-in hob use a hose?

Only if the maker allows, and not if it can be strained.

03In Tufnell Park, how often should a hose be checked?

Yearly, and replaced at the recommended interval.

04In Tufnell Park, who tests the joint?

The installer, with the result noted.

05cooker and hob installation: gas smelt in Tufnell Park?

Call 0800 111 999 first, and Tufnell Park cooker and hob installation comes second, so Tufnell Park cooker and hob installation may resume later.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about cooker & hob installation in Tufnell Park.

Say whether your cooker is built in or freestanding, and Heat Go will write a short card of connection questions.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Cooker & hob installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.