Tufnell Park houses with old and new pipework mixed together
Settings need care. Ask what was changed and why.
Boiler installation · Tufnell Park
The last job of an installation is to start the boiler and prove that it works properly. The installer should take readings, set the controls and write them down. A record that is complete, signed and dated is the proof that this was done. Households in Tufnell Park can ask to see it on the day and keep a copy.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Large Victorian houses in Tufnell Park have been altered many times, and their heating systems carry the marks. A new boiler joins pipes of different ages, and its settings depend on what it meets. A good commissioning record tells the next engineer what he found and what he did, and it matters when the house is sold.
A commissioning record should show five kinds of information. Details of the boiler: make, model, serial number and the date of installation. Readings taken on the day: gas rate, working pressure, flue gas readings and water temperatures. Settings made: the heating output, the controls and the timer. Checks made: the flue, the condensate pipe, ventilation, system water and the safety devices. And signatures and dates, with the installer’s details. Ask the installer to explain any figure you do not follow. Check that no box has been left blank and that the serial number matches the label on the boiler. For boiler installation in Tufnell Park, keep the record with the manual.
With the boiler’s make and model, Heat Go can prepare a short checklist for reading the record on the day.
Settings need care. Ask what was changed and why.
The first start may need extra checks. Ask for them to be recorded.
A buyer will read the record. Ask for a clear, complete copy.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Tufnell Park houses with old and new pipework mixed together | Roadside | Utility room | Mixed systems |
| Tufnell Park homes where the heating was off for weeks | Drives common | Kitchen | First starts |
| Tufnell Park houses about to be sold | Permit zones | Study | Sale files |
Be at home when the installer starts the boiler and ask him to talk through the record as he fills it in. Take a photograph of it.
A household in Tufnell Park has a boiler installed and asks to see the commissioning record before the installer leaves. He talks through each box: the gas rate, the pressure, the flue readings, the temperatures and the settings. One box for the condensate check is blank, and he fills it in after testing the pipe. The household photographs the record and keeps a printed copy with the manual. Years later, a surveyor reads it and asks no questions, since each box is complete. After the installer leaves, the household reads the record again with the manual open beside it and finds the flue gas readings match the figures the manual gives. They note the date and the settings in the folder, and set a reminder for the first service. The record becomes the baseline for every later visit, and the engineer at the first service refers to it as he works through the checks.
A record is made at the moment of installation, so there is no season for it, but a household at home and unhurried can ask more questions. A morning start leaves time for the installer to finish the record before he leaves. An evening finish may leave boxes to fill in later. A record is only as good as the moment it is made, so be at home and unhurried when the boiler is started. A morning start leaves the installer time to complete the record and answer questions before he leaves. A record read on the afternoon of the visit is easier to correct than one questioned weeks later.
The final starting, testing and setting up of a new boiler, with the results recorded.
An analyser’s reading of the exhaust gases as they leave the boiler.
A one-off number on a boiler’s label that identifies that very unit.
A written account of the boiler’s checks and settings on the day.
Details, readings, settings, checks and signatures.
Yes, ask for one and photograph it.
Ask the installer to fill it in.
Dial 0800 111 999 first, then Tufnell Park boiler installation comes second, so Tufnell Park boiler installation can start again later.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Heat Go can draw up a checklist for reading the record once you give it the make and model of your boiler.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in Tufnell ParkAll boiler installation areas