Boiler installation · Tottenham

Boiler installation in Tottenham: testing mains water pressure and flow before choosing a combi boiler

A combi works as the water runs through it, so a weak mains hurts it more than it hurts other boiler types. If the pressure or the flow rate into the house is weak, a new combi may give a thin trickle at the shower however well it is fitted. A simple test before the order is placed shows what the supply can do. Anyone in Tottenham weighing up a combi can carry it out with a jug and a watch, then pass the figures to the installer.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Streets in Tottenham include long runs of terraced houses where the water main enters at the front and passes under the hall. Some houses still have lead or narrow older pipes between the street and the stopcock, and some share a supply with the flat above or next door. A narrow or shared pipe limits flow, however much pressure shows on a gauge.

The test has five parts. First, find the stopcock and confirm that it opens fully. Second, fill a measuring jug from the kitchen cold tap, fully open, and time it, and note the seconds taken. Third, repeat it with another tap running elsewhere, to see how far the flow drops. Fourth, ask the installer to fit a gauge on an outside tap or the incoming pipe and record the pressure, both at rest and with water running. Fifth, compare the readings with the boiler’s data sheet. Where the supply is too weak for a combi, a system boiler with a cylinder, or a wider pipe from the street, may be the better plan to price.

Heat Go will help you plan the test. Tell us the type of house and how many taps run at once, and a short set of figures to collect can be drawn up for the installer.

Testing the water supply before a combi goes into a Tottenham house

Water supply questions in different Tottenham homes

Tottenham: terraces with an old supply pipe from the street

The pipe may be narrow. Ask whether flow, not pressure, is the limit.

Tottenham houses converted into two flats on one supply

Both homes draw from one pipe. Ask for the test to be done with both in use.

Tottenham homes with a loft tank still feeding the taps

Pressure at the shower may be low. Ask about a pump or a sealed system.

SettingParking and van accessProperty accessTypical enquiries
Tottenham: terraces with an old supply pipe from the streetRoadsideHallwayOlder pipes
Tottenham houses converted into two flats on one supplyPermit zonesShared meter cupboardShared supplies
Tottenham homes with a loft tank still feeding the tapsDrives commonLandingTank-fed taps

Show the installer the stopcock, any meter and the kitchen tap. Say how many people use hot water at busy times and whether a shower runs while a tap is open.

A household of four in a terraced house wants a combi because the cylinder cupboard could become a wardrobe. The installer asks for a flow test and finds that a litre takes nine seconds, slowing to fifteen with a second tap open. He explains that a combi would give a weak shower when anyone ran the kitchen tap. The household chooses a system boiler and a smaller cylinder instead, and keeps the figures with the quote so that the reasoning is clear if anyone reads the file later.

Supply tests are easier when the house is quiet, such as a weekday morning after the school run. Late summer works well for planning, because there is still time to change the plan before winter arrives. In a cold spell, demand rises on every street at once and the same house may behave differently from the figures taken in August.

Good to know in Tottenham

Flow rate

How much water passes a point in a set time, usually quoted in litres per minute.

Static pressure

The pressure in a pipe when no water is running.

Stopcock

The tap on the incoming mains pipe that cuts off water to the whole home.

Questions about boiler installation in Tottenham

01In Tottenham, why does flow matter for a combi?

The boiler heats water as it runs, so a weak supply gives a weak flow at the tap.

02In Tottenham, can I test it myself?

A jug and a watch give a rough idea, and the installer can measure properly.

03In Tottenham, what if the supply is poor?

A system boiler with a cylinder, or a wider supply pipe, may help.

04In Tottenham, does pressure or flow matter more?

Both count, but flow is often the limit in older streets.

05Tottenham boiler installation: what if gas is smelt?

Dial 0800 111 999 first, Tottenham boiler installation pauses at once, and Tottenham boiler installation can start again later.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about boiler installation in Tottenham.

Tell Heat Go your Tottenham street and how many taps run together, and a list of readings for the installer can be prepared.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Boiler installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.