Boiler installation · Whetstone

Boiler installation in Whetstone: whether the gas pipe to a new boiler is wide enough for what the boiler will draw

A new boiler may need more gas than the old one, or the same amount delivered more reliably. The pipe that brings the gas from the meter was sized for an earlier appliance, and it may be narrow, long or shared with a cooker and a fire. If the pipe is too small, the boiler may struggle to fire at full output on a cold day. A short check at the survey stage avoids a disappointing first winter. Anyone in Whetstone with a long pipe run can ask for it.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Many houses in Whetstone have the meter at the front and the boiler at the back, with a gas pipe running the length of the house, often in a ceiling void or under a floor. Over the years, a cooker, a fire or a second boiler may have been added to the same pipe. The installer should look at the route, the size of the pipe, the number of appliances it serves and the meter’s capacity.

Five things make up the check. The boiler’s gas rate, from the maker’s data. The size of the pipe at the meter and along the run, noted at each change. The length of the run and the number of bends. The other appliances on the same supply and the rate each draws. And a test of the gas pressure at the boiler, with the boiler and other appliances running together, to show that it does not fall. If the pipe is too small, a larger one can be run on a new route. A written note should record the readings, noting the date and who took them, so that anyone who later adds an appliance can compare.

Heat Go can help you plan the check. Describe where the meter and the boiler are and what else burns gas, and a short question sheet for the installer can be written.

Checking the gas pipe for a new boiler in a Whetstone house

Gas pipe questions in different Whetstone homes

Houses with the meter at the front and the boiler at the back

The run is long. Ask for the pipe size to be checked at the meter and at the boiler.

Houses with a gas fire and a cooker on the same pipe

Each draws gas at once. Ask for a pressure test with all running together.

Houses with pipes under a solid floor

A larger pipe is hard to run. Ask about alternative routes.

SettingParking and van accessProperty accessTypical enquiries
Houses with the meter at the front and the boiler at the backRoadsideHallwayLong runs
Houses with a gas fire and a cooker on the same pipeDrives commonKitchenShared supplies
Houses with pipes under a solid floorPermit zonesUtility roomBuried pipes

Tell the installer which appliances use gas and where the pipes run. Show them the meter and any plan of the pipework.

A household in a long house plans a larger boiler. The installer finds the gas pipe narrows along the run and serves a cooker and a fire as well. He tests the pressure at the boiler with the cooker running and sees it fall. He proposes a new, wider pipe on a route through the ceiling void. After the work, the pressure holds with everything on. The household keeps his readings and a sketch of the new pipe’s route, and later passes both to the next owner when the house is sold, so the history of the supply is not lost.

A gas pipe check belongs in the survey. Late summer is a good time to ask, with the work done before the cold. A pipe that is marginal in October can be a real problem in January, when the boiler runs flat out for hours and other gas appliances run beside it at the same time.

Good to know in Whetstone

Gas rate

How much fuel a gas appliance burns when working at full output, normally quoted in kilowatts.

Working pressure

The gas pressure at an appliance while it is running.

Run

The length of pipe between the meter and an appliance, including each bend along the way.

Questions about boiler installation in Whetstone

01Why does the pipe size matter?

A narrow pipe may starve a boiler on a cold day.

02How is it checked?

By measuring the pipe and testing pressure with appliances running.

03Can a larger pipe be fitted?

Often, on a new route.

04Who tests the gas pressure?

The installer, with a gauge.

05What if gas is smelt after the work?

If you can smell gas, 0800 111 999 is the number to call first, from outside, with the windows open and no switch or flame used.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about boiler installation in Whetstone.

Tell Heat Go where your meter and boiler are, naming your Whetstone street, and a question sheet for the installer can be written.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Boiler installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.