Houses with a kitchen boiler
A kitchen on an outside wall has a short flue and an easy drain. Keep that position unless there is a reason to move.
Boiler installation · Cockfosters
Most people begin a boiler project by asking which boiler to buy. Experienced installers begin with where it will go. The position decides how long the flue must be, where the exhaust leaves the building, how the waste water drains away and how much pipework must change. Choose the wrong place and the best boiler on the market becomes a headache, with a long flue, a frozen drain pipe or a bill for moving radiators that nobody expected. A household in Cockfosters can avoid that by walking round the house with three questions in mind.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
The houses near the terminus were mostly built after the line opened in 1933, and boilers in them sit in kitchens, utility rooms, airing cupboards and sometimes lofts. Each of these has advantages. A kitchen is usually on an outside wall, so the flue is short. An airing cupboard may be nearer the hot water cylinder but further from the outside. A loft needs access and a safe floor. The choice also depends on where the old boiler stood, since existing pipes and a flue may already be there.
The three questions are these. Where can the flue leave the building, given the rules on distances from windows, doors and boundaries? Where will the condensate, the slightly acidic water that a modern boiler produces, drain to? Where are the existing pipes, which would need to be moved if the boiler goes elsewhere? A sketch with answers to all three is the best start. Heat Go can say which positions look practical and which need further checking.
A ground-floor sketch with the old boiler, the outside walls and the nearest drain marked lets the first conversation be specific. Photographs of the proposed spot and the walls around it complete it.
A kitchen on an outside wall has a short flue and an easy drain. Keep that position unless there is a reason to move.
A cupboard needs ventilation and clearances. Say what surrounds it and whether the outside wall is near.
A flat’s boiler position is often fixed by the building. Ask the managing agent about flue routes.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a kitchen boiler | Drives common | Kitchen | Short flues |
| Houses with a boiler in the airing cupboard | Roadside | Landing | Cupboard fit |
| Flats at the terminus end | Permit zones | Stairwell | Fixed positions |
Whoever attends will need to see the position, the outside wall and the drain. Explain the way to the loft or the cupboard, and whether a vehicle can wait near the house for a day or more.
A couple want to move their boiler from the airing cupboard to the kitchen. They sketch both positions, photograph the kitchen’s outside wall and the sink’s waste, and note a window two metres from the proposed flue. The answer might be that the window distance is a concern, that the condensate can use the sink waste and that the old position may be the better choice unless the flue can be moved.
Installations are best planned in early autumn, when the old boiler can be removed without leaving the house cold for long. Decisions about position take time, so start the conversation in August or September.
The water that a condensing boiler produces. It must drain away through a suitable pipe, and in cold weather the pipe must not freeze.
The point where the exhaust leaves the building. Its position follows distance rules.
A boiler needs space around it for ventilation and servicing. A cupboard must be large enough.
Often, though a modern boiler may need different clearances and a different flue. Check.
To a suitable waste or soakaway. The pipe should be protected from frost.
Within limits set by the maker. Long flues reduce performance.
The flue terminal must be a set distance from openings.
Usually some. A new position means new connections.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
From your sketch, your pictures and the road you live on in Cockfosters, Heat Go can say which positions look practical.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in CockfostersAll boiler installation areas