Houses with underfloor loops and radiators
A large volume of water needs good quality. Ask for tests at the manifold as well as the pump.
Heat pump servicing · Golders Green
The water in a heating circuit is the quiet partner of every heat pump. If it is dirty, corroded or the wrong mix, the pump works harder and wears sooner. A service that tests the water as well as the machine catches problems that cannot be seen. In a larger house, with more pipe and radiators, there is more water to look after. Households in Golders Green can ask what will be checked and see the results.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Larger houses in Golders Green often have heat pumps connected to many radiators and underfloor loops, with a good volume of water in the circuit. Over time, iron oxide and scale can build up, and a filter in the pipework catches some of it. Some systems have antifreeze or a protective inhibitor in the water, and its level needs testing. Air in the circuit also reduces efficiency.
A water check has five parts. The condition of the water, judged by its colour and a test of acidity or hardness, as the maker states. The filter or strainer, taken out, cleaned and put back. The inhibitor level, measured with a test kit and raised if it is low. Any antifreeze protection, tested to show the temperature at which it protects. And air removal, since trapped air reduces flow. A written note should give the test results, so that changes can be compared year to year.
Heat Go can help you read the water results. Send the engineer’s sheet with personal details covered, and a plain-English reading can be offered.
A large volume of water needs good quality. Ask for tests at the manifold as well as the pump.
Old steel sheds rust. Ask whether a filter is fitted and how much debris it collects.
Outdoor pipes may need antifreeze protection. Ask what is in the circuit and its test level.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with underfloor loops and radiators | Roadside | Utility room | Large systems |
| Houses with older radiators | Drives common | Hallway | Old radiators |
| Houses with an outdoor pipe run | Permit zones | Garden | Frost protection |
Tell the engineer whether any antifreeze or inhibitor was added at installation. Give them the installation papers if you have them.
A household’s heat pump is serviced in autumn. The engineer tests the water, finding it a little cloudy, cleans the strainer, which holds a spoonful of dark grit, and tops up the inhibitor. He tests the antifreeze and finds it protects to a safe temperature. His note records each result. The household files it with the first year’s, and the comparison shows the water is cleaner than last time. The engineer adds that a slow rise in the amount of debris from year to year is normal in a house with older radiators, and that a sudden increase would be a signal to look for a failing part. He suggests the household keep the filter results in a column of their own, so that the trend is easy to see, and offers to send a one-page summary after each visit. He also recommends photographing the strainer’s contents each time, so the amount of grit can be compared by eye as well as by his notes. The household files it with the sheets.
Water tests are best done at the autumn service, before the system works hard through the winter.
A treatment mixed into the circuit water to hold back rust and limescale.
A fitting in the pipework that catches debris before it reaches the pump.
A mixture in the circuit that stops water freezing in a cold spell.
Dirty water wears the pump and lowers efficiency.
Not all. The installation papers say.
At each service, and the results kept.
Leave it to the engineer, who can isolate it safely.
The engineer may advise a clean or a flush.
Talk to Heat Go
Send Heat Go the engineer’s sheet with personal details covered, with your Golders Green road, and a plain reading can be offered.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in Golders GreenAll heat pump servicing areas