Houses with two or more heating zones
Each zone valve can stick. Ask for each to be tested and the result noted.
Boiler servicing · Golders Green
A larger house has more to service than the boiler alone. Zone valves direct the heat to different floors, a cylinder stores hot water, an expansion vessel takes up the water’s growth and a pump keeps it all moving. Each can fail on its own, and each is easy to overlook on a service that looks only at the boiler. Households in Golders Green can ask what else will be checked and agree it before the visit.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
In bigger Golders Green houses two or three zones, a cylinder in an airing cupboard and a system built up over time are common. The zone valves sit in the pipework, sometimes behind boxing. The expansion vessel may be on the boiler or elsewhere. A full service takes in the controls and the pump as well as the burner.
Ask for a service that covers five extras. The zone valves, tested for free movement and a clean return when the call for heat stops. The expansion vessel, checked for its pressure and for signs of waterlogging. The pump, listened to and checked for speed and leaks. The cylinder thermostat and its wiring. And the programmer and room thermostats, tested against their settings. Agree beforehand how long the visit will take, since the extra checks need time, and ask for a note of anything outside the boiler that was found.
Heat Go can set out a fuller service request for a larger house. Tell us how many zones there are and what the cylinder and controls look like, and the points to agree can be listed.
Each zone valve can stick. Ask for each to be tested and the result noted.
The cylinder thermostat and its wiring can fail unseen. Ask for them to be tested.
A vessel in the loft or behind boxing is easily forgotten. Ask whether access can be arranged.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with two or more heating zones | Roadside | Hallway | Zone valves |
| Houses with a cylinder in the airing cupboard | Drives common | Landing | Cylinder controls |
| Houses with an expansion vessel out of reach | Permit zones | Loft hatch | Hidden vessels |
Show the engineer the zone valves, the cylinder and the programmer before the service, and tell them about any faults you have noticed.
A household in a larger house arranges a service and asks for the extras. The engineer tests both zone valves and finds one slow to close. He checks the expansion vessel, which has lost pressure, and recharges it. He listens to the pump, notes the speed setting and checks the cylinder thermostat. The note he leaves records each item and its result. The household finds the heating more even in the weeks that follow. The engineer also suggests testing the zones in turn at the start of each heating season, by turning each thermostat up in turn and listening for the valve. The household adds the test to its September list, with a note of what each zone sounds like when it is working properly, so that any change would be noticed.
A fuller service takes longer, so book it for September, when the diary is easier and any fault can be fixed before the cold sets in.
A motor-operated valve that sends heat to one floor or area of the house, or shuts it off.
An expansion vessel that has lost its air charge and can no longer take up the water’s growth.
A sensor that tells the boiler when the stored hot water has reached its set temperature.
They should be tested, since a stuck valve can leave a zone cold or hot.
Pressure may swing or the relief pipe may drip.
Ask the engineer in advance what is included.
Yes, by listening and checking the speed and any leaks.
A note listing each item tested and the result.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go how many zones your house has, with your Golders Green street, and the points to agree with the engineer can be listed.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in Golders GreenAll boiler servicing areas