Houses with a large cylinder
A big store can hold a day’s hot water. Heating once in the cheap period may be enough.
Heat pump controls & optimisation · Golders Green
Some electricity tariffs charge less at certain hours, usually overnight. A heat pump with a cylinder can use this: heat the water in the cheap hours, store it and use it later. Done sensibly, it cuts the cost of hot water without any loss of comfort. Done carelessly, it leaves the household cold in the evening. Households in Golders Green on such a tariff can set up their controls to fit it.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Larger houses in Golders Green have bigger cylinders, which hold more heat and so are well suited to heating in cheap hours. The controller’s schedule can be set to run the heating at the start of the cheap period. The size of the cylinder, the household’s use and the tariff’s hours decide how well it works. A small cylinder may not hold enough for a large family.
The set-up has five steps. Find out the exact hours of the cheap rate on your tariff. Estimate the household’s hot water use in a day, and compare it with the cylinder’s size. Set the heating to run in the cheap hours and finish by the end of them. Check the hot water temperature in the evening, after a day’s use. And watch the bill over a month or two. If the cylinder runs short, add a small top-up at another time, or raise the temperature a little.
Heat Go can draft a schedule with you. Tell us your tariff’s hours and the cylinder size, and a few sensible times to begin with can be offered.
A big store can hold a day’s hot water. Heating once in the cheap period may be enough.
Demand is high. Ask whether a small top-up outside the cheap hours is needed.
The cheap period may shift. Check the hours each season and adjust.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a large cylinder | Roadside | Utility room | Large stores |
| Houses with a big family | Drives common | Bathroom | Heavy demand |
| Houses with a tariff whose hours change seasonally | Permit zones | Hallway | Changing hours |
Give the engineer the tariff’s hours and the household’s daily pattern. Ask them to check that the controller’s clock is right.
A household moves to a tariff with cheaper electricity from midnight to five. They set the cylinder to heat at one o’clock and finish by five. The hot water lasts through the day, but runs short on Sunday evenings, when guests stay. They add a short top-up on Sundays at four in the afternoon. After two months, their hot water costs fall. They note the settings and the tariff’s hours. The engineer adds that tariff hours sometimes shift when a supplier updates its terms, and that the schedule should be checked after any letter from the supplier. He suggests the household look at the controller’s clock each spring and autumn, when the clocks change, so that the cylinder always begins at the start of the cheap period. They add both dates to their calendar and file the tariff’s terms with the settings. The household also keeps a note of the date they last checked that the controller’s clock agrees with the time on their phone.
A tariff change is a natural moment to review the schedule. Do so at the start of the new tariff, and again at the change of season.
An electricity tariff with different prices at different hours of the day.
The hours in which electricity costs less under a time-of-use tariff.
A short additional heating period used when the main heating has not provided enough hot water.
Often, if it is big enough for the day’s use.
Add a short top-up or raise the temperature a little.
Yes. Check it is right and changes with the seasons.
It can, depending on the tariff and the household’s use.
Yes, so the schedule is set correctly.
Talk to Heat Go
Share your tariff’s hours and the cylinder size with Heat Go, along with your Golders Green street, and times to start with can be proposed.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in Golders GreenAll heat pump controls & optimisation areas