Families with children
Peaks occur in the morning and evening. The schedule must heat the cylinder before them.
Heat pump system assessment · Finchley
Too small a cylinder runs dry, and too large a one takes up room and holds heat for nothing. In a heat pump system, getting the size and settings right matters even more than with a boiler, because the pump heats the water slowly. An assessment compares what the cylinder offers with what the household uses. People in Finchley can gather the facts for it in a week, with a notebook on the bathroom shelf.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
In the Church End streets, households vary from couples to large families, and their hot water use varies accordingly. A cylinder chosen for a family of two may be too small after a baby arrives, and one chosen for five may be too big once the children leave, and the household may never have thought to revisit the choice. The settings, such as the target temperature and the schedule, may not have changed since installation, even though the household’s mornings have changed completely.
A week’s diary does the job. Note each day who showers or bathes, roughly when and for how long, plus dishwasher and washing machine use if they take hot water, and any visitors, since an extra guest can double a morning’s demand. Note when the water runs out, if it does, and what the tap felt like in the last minute before it cooled. Read the cylinder’s size from its label and its target temperature from the controls. With these, an assessor can compare supply and demand, and say whether a change of setting or schedule would be enough, or a different cylinder is needed, and in most households the first is all it takes.
Heat Go will help design the diary and read it afterwards, if it is given the label details, the settings and your notes.
Peaks occur in the morning and evening. The schedule must heat the cylinder before them.
Use is spread over the day. A smaller cylinder may suffice.
Space limits the size, so a careful schedule matters more.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Families with children | Roadside | Bathroom | Peak demand |
| Couples working from home | Drives common | Kitchen | Spread use |
| Flats short of cupboard space | Permit zones | Hallway | Small cylinders |
Give the assessor your diary and photographs, and say where the cylinder is and how it is reached.
A family notices that the hot water runs out on Monday mornings. They keep a diary for a week and find that three people shower between half past six and eight, and that the cylinder’s schedule only starts at six. They send the diary, the label and a photograph of the controls to Heat Go. The reply suggests starting the schedule earlier and raising the target slightly, and says that a larger cylinder would be needed only if the change failed.
Hot water demand rises in the dark months, when showers last longer and the cold water entering the house is colder. A diary kept in October shows the pattern before the worst of winter and leaves time to adjust.
The busiest hours for hot water in the household’s day.
How long the pump needs to reheat the cylinder after use.
The temperature the cylinder is meant to hold.
It depends on who uses hot water and when, so keep a diary for a week and let an assessor judge from it, instead of relying on a rule of thumb.
The cylinder may be small, the target low or the schedule late, and a week’s diary usually shows which of the three it is.
Often yes, following the guide, and an installer can confirm what suits your pump.
Sometimes, though a better schedule often helps more, and costs nothing, so it is the first thing to try before anything is bought.
Within the maker’s guidance, and ask what suits your cylinder, since a hotter store lasts longer but makes the pump work harder to fill it.
Talk to Heat Go
Your diary, the label details and your Finchley street are what Heat Go needs for a view on the cylinder.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in FinchleyAll heat pump system assessment areas