Heat pump system assessment · Edgware

Heat pump system assessment in Edgware: measuring the sound of the system inside the house and at the boundary

Households and their neighbours care how a heat pump sounds, and sound is easy to argue about and hard to judge by ear. An assessment can measure it, indoors and at the boundary, at stated times and settings, and compare the figures with the maker’s data and local expectations. A reading on paper settles more than a feeling. Households in Edgware can ask for one if sound is a concern.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Homes in Edgware are close together, and the outdoor unit may stand a few metres from a neighbour’s window. Indoors, pumps, pipes and cylinders can carry noise through floors and walls. A sound level meter, held at a stated distance, gives a figure. The figure varies with the pump’s load, the time of day and the background noise, so several readings are needed.

A sound assessment has five parts. A set of readings near the outdoor unit, at one metre and at the boundary, with the pump at a typical load. A set inside the house, in the rooms nearest the unit and the plant. The background level without the pump, for comparison. The conditions: the time, the weather and the pump’s mode. And a comparison with the maker’s stated level and any local guidance. The report should say plainly whether the readings are in line.

Heat Go can help you read a sound report. Send the figures, and a plain reading of what they mean can be offered.

Requesting sound readings for an Edgware heat pump installation

Sound measurement questions in different Edgware homes

Homes with the unit near a boundary fence

The boundary reading matters most. Ask for it to be taken at the neighbour’s window height.

Homes with the plant in a cupboard off a bedroom

Sound passes through the wall. Ask for a reading in the bedroom at night.

Flats with the unit on a shared roof or yard

Sound spreads to several homes. Ask for readings at more than one point.

SettingParking and van accessProperty accessTypical enquiries
Homes with the unit near a boundary fenceRoadsideBack gardenBoundary levels
Homes with the plant in a cupboard off a bedroomDrives commonBedroomIndoor noise
Flats with the unit on a shared roof or yardPermit zonesShared yardShared spaces

Tell the assessor which rooms and which neighbours worry you, and the time of day the sound seems worst.

A household worries about the sound of the heat pump at night. The assessor takes readings at one metre and at the boundary, and in the bedroom closest to the unit. He notes a night-time background level and compares. The unit is within the maker’s figure, though the bedroom reading is higher than the household had hoped. He suggests a night mode and rubber mounts. The sound falls, and the household keeps the report. The assessor suggests that the household speak to the neighbour with the report in hand, offering a copy and inviting comments. The neighbour reads it, looks at the figures and says she is content, and that she would have preferred to know about the unit before it was fitted. The household takes the point, and promises to share the same kind of report if any change is made in future. They also arrange a short follow-up measurement in a year. The assessor files the readings and the conditions under which they were taken, so that the second set can be compared like with like. He suggests choosing a similar evening in the same season, with the pump running in the same mode, which keeps the comparison fair and the result easy to trust.

A sound assessment is most revealing on a quiet evening, so autumn evenings suit.

Good to know in Edgware

Background level

The sound present in a place without the source being measured, such as traffic or wind.

Sound level meter

An instrument that measures the loudness of a sound in decibels.

Night mode

A setting that reduces the unit’s speed and noise at night.

Questions about heat pump system assessment in Edgware

01Can sound be measured at home?

Yes, with a sound level meter, at stated places and times.

02Why include the background level?

It shows how much of the sound comes from the pump.

03What is a night mode?

A setting that lowers the unit’s speed and noise.

04Do rubber mounts help?

They reduce vibration carried into the structure.

05Who uses the report?

You, your neighbour if needed, and the installer.

Talk to Heat Go

Ask about heat pump system assessment in Edgware.

Send Heat Go the figures from your assessment and your Edgware road, and a plain reading can follow.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heat pump system assessment enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.