Solid-walled houses
Heat loss through solid walls is high, so radiators may need to be larger. Insulation upgrades can reduce the requirement.
Central heating installation · Finchley
A radiator that is too small never heats the room, and one that is too large wastes space and may cause the boiler to cycle on and off. Getting the size right depends on a handful of facts about each room: its volume, the area of glass, the number of external walls and the insulation in the house. Households in Finchley planning an installation can gather those facts in an afternoon with a tape measure and a notebook.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Around Church End, the houses range from solid-walled older homes to later cavity-walled ones, with differences in glazing from single panes to modern double units. These differences matter more than the age of the house itself. A bay window loses more heat than a small sash, and a gable wall loses more than a party wall. Each room needs its own calculation, and the result is often a surprise: a small room with two outside walls can need more output than a larger one that sits in the middle of the house.
The standard approach is a heat-loss calculation, which estimates how much heat each room loses on a cold day and chooses a radiator to replace it. The key inputs are the room’s dimensions, the construction of walls, floor and ceiling, the glazing, the number of external walls and the temperature wanted in winter, since a bedroom and a living room are rarely kept at the same level. Simple online calculators give a rough figure, but an engineer’s survey is more reliable, especially for unusual rooms such as a conservatory or a bathroom with a towel rail.
A room-by-room list is the best start. Send the dimensions, window sizes, wall construction and use of each room, and Heat Go can explain how the sizes of radiators will be worked out and what other choices, such as column or towel radiators, may suit.
Heat loss through solid walls is high, so radiators may need to be larger. Insulation upgrades can reduce the requirement.
Heat loss is lower, and smaller radiators may suffice. Check whether the loft is insulated.
Neighbours’ heat keeps rooms warmer, but rooms with external walls need more. Measure each wall carefully.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Solid-walled houses | Roadside | Front room | Higher heat loss |
| Cavity-walled houses with double glazing | Drives common | Lounge | Lower heat loss |
| Flats with shared walls | Permit zones | Common stairs | Mixed walls |
A surveyor needs to see every room, so mention any locked or shared space in advance. A note of which entrance is best, and how each room is reached, helps the measuring go quickly.
A couple replace single-glazed windows and add loft insulation before installing a new system. They measure each room, noting the large bay in the front room and the small window in the study. The calculation suggests a larger radiator for the bay and a smaller one for the study than they had assumed. Heat Go can say that the sizes will be confirmed at a survey and that column radiators might suit the hall.
A survey in September, before the cold arrives, lets the engineer see how each room behaves and lets the household report where the draughts are.
A room-by-room estimate of how much heat is lost, which determines the size of each radiator.
A bay has a large area of glass and loses heat quickly. It often needs a larger radiator.
Improving insulation can reduce the size of radiators needed, and the cost of running them.
The answer differs for every room. A calculation uses the size, the glazing, the walls and the insulation, and it should be repeated for each room rather than assumed from one.
No. An oversized radiator can make the boiler cycle and waste space.
A survey is the most reliable way to size radiators, particularly for unusual rooms such as a conservatory, a loft bedroom or a bathroom with a heated towel rail, where rules of thumb break down.
Yes. Better insulation can reduce the size of radiators and the cost of heating.
A heated towel rail can suit a bathroom, but its output must match the room’s needs.
Talk to Heat Go
Give Heat Go the room measurements, the wall and glazing types and your Finchley road, and a view on radiator sizes can follow.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All central heating servicesEvery service in FinchleyAll central heating installation areas