Kitchens being knocked through
An open-plan kitchen may place the cooker on an island or a far wall. Plan the pipe route early.
Cooker & hob installation · Finchley
A kitchen redesign often moves the cooker. The old spot becomes a fridge-freezer, and the cooker finds a new home against a different wall, often further from the pipe than anyone expected. It sounds simple, but the gas pipe stays where it was, and a cooker cannot simply be pushed along. The move needs a new gas point, a safe route and a proper connection. Households in Finchley who understand why can plan their layout accordingly.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Kitchens in the Church End streets of Finchley have been refitted many times, with layouts changing from decade to decade. Gas pipes, however, were laid for the earlier layout and sit in the walls and floors. A cooker moved two metres along a wall may be far from any gas supply, and the old pipe, if it is no longer needed, must be safely capped.
The work has three parts. A new gas point is made at the new position, with a pipe run from the nearest suitable supply, through the wall or floor, and an isolation valve in an accessible place. The old gas point is capped, with the pipe sealed and tested. The cooker is connected with a flexible hose of the right length, not stretched or kinked, and a stability device is fitted. The whole is tested.
Discussing a cooker move early helps. A plan with both positions marked and photographs of the existing pipe let Heat Go say what is needed. Any smell of gas is a different matter: go out and use 0800 111 999.
An open-plan kitchen may place the cooker on an island or a far wall. Plan the pipe route early.
A pipe to an island needs a route under or over the floor. Say what the floor is.
A flat’s gas pipe may be shared. Ask the agent before moving anything.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Kitchens being knocked through | Drives common | Kitchen-diner | Open plans |
| Kitchens with a solid floor | Roadside | Kitchen | Solid floors |
| Flats with a moved cooker | Permit zones | Common stairs | Shared pipes |
Say when the kitchen fitter will be on site and who gives access to the kitchen. The gas work must fit with the fitter’s schedule.
A couple redesign their kitchen and decide to move the cooker to the back wall, where it will sit under a new window and beside a bank of tall units. They draw the plan and photograph the old pipe. The kitchen fitter asks when the gas work will happen, and they realise it must be done before the units go in. The engineer runs a new pipe along the wall behind the units, caps the old point and connects the cooker, then tests every joint. The whole job takes a morning, because the pipe route was decided before the plasterer arrived.
Kitchen projects are often timed to finish before the winter holidays. Planning the gas work in September means it fits with the fitter’s programme and not against it, and it avoids the frantic week in December when everyone wants a cooker.
The place where a gas pipe ends and the appliance is connected, with an isolation valve.
Sealing an unused pipe safely and testing the seal.
A flexible hose has a maximum length and must not be stretched or kinked.
Only as far as the hose reaches. Beyond that, a new gas point is needed.
It is capped safely and tested, then either removed or left behind the units with a note of where it ends, so that nobody drills into it later.
Before the units and walls are finished, ideally just after the old kitchen has been stripped out, when every pipe is in plain view.
Often, if a pipe route can be made. Plan it early.
A gas engineer. It is not a job for a general builder, however able, and the work must be tested before it is hidden behind plaster or tiles.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Send the plan, the photographs and your Finchley street, and Heat Go will outline the gas work. Do not send anything about a live smell of gas: ring 0800 111 999.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in FinchleyAll cooker & hob installation areas