Heat pump system assessment · Colindale

Heat pump system assessment in Colindale: how ventilation heat recovery in a newer flat changes the heating the flat needs

Many newer flats are very airtight and rely on a mechanical ventilation system with heat recovery, which takes warmth from stale air leaving the flat and passes it to fresh air coming in. That cuts the heat the flat loses, and so the heat the pump must supply. An assessment that ignores the ventilation can oversize the pump. One that includes it fits the system to the flat. Residents of Colindale can ask whether theirs does.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Flats in Colindale’s recent blocks are built to tight standards, with little leakage, and the fresh air comes through a unit in a cupboard or ceiling void. The unit has filters that need changing. If they clog, the flat gets stuffy and the heat recovery works poorly. The assessment should note the ventilation type, its settings and its condition.

A joined-up assessment covers five points. The ventilation unit’s make, its heat recovery efficiency and its current settings. The airtightness of the flat, from the building records if available. The heat loss, calculated with the ventilation’s recovery taken into account. The pump’s size in relation to that figure. And the condition of the filters and the ducts. The assessor should say how ventilation and heating interact, and what to keep in good order. A written summary helps the household and the landlord.

Heat Go can help you check an assessment. Tell us whether your flat has mechanical ventilation, and queries for the assessor can be assembled.

Checking ventilation and heating together for a Colindale flat

Ventilation questions in different Colindale flats

Flats with a unit in a ceiling void

The filters may be hard to reach. Ask how they are changed and how often.

Flats with a boost button in the bathroom

Boost raises airflow and heat loss. Ask how it affects the system.

Flats where a tenant lives and a landlord pays

Filters are often forgotten. Ask who is responsible for changing them.

SettingParking and van accessProperty accessTypical enquiries
Flats with a unit in a ceiling voidPermit zonesHallwayHidden units
Flats with a boost button in the bathroomRoadsideBathroomBoost settings
Flats where a tenant lives and a landlord paysDrives commonUtility cupboardFilter care

Give the assessor the make of the ventilation unit and any building records on airtightness. Tell them how the unit is used.

A tenant in an airtight flat has a heat pump and a ventilation unit with heat recovery. The assessor checks the ventilation’s efficiency and finds the filters blocked. They are replaced. He recalculates the heat loss with the recovery included and finds the pump is right-sized. The summary lists the filter change interval. The landlord files it and puts a reminder in the diary. The assessor also advises the tenant to keep the ventilation on its normal setting during winter, since switching it off to save electricity lets moisture build up and the flat feel damp. He explains the boost button and when it is worth using, and the tenant writes the points on a card by the bathroom door. The landlord, told about the card, asks whether it can be copied for other flats in the block that share the same system. The tenant also notes the date the filters were last changed, and leaves a spare set in the cupboard, so the next change is quick. She also writes the filter size on the card, so the right replacement can be ordered without opening the unit. The landlord is told, and agrees to keep a stock of spare filters with the other supplies for the block.

A joint assessment is best made before winter, with filters changed so that the ventilation and heating start the season in good order.

Good to know in Colindale

Heat recovery ventilation

A system that passes warmth from outgoing stale air to incoming fresh air.

Airtightness

A measure of how little air leaks through the walls and joints of a building.

Boost mode

A setting that raises the ventilation rate for a period, such as after a shower.

Questions about heat pump system assessment in Colindale

01Does ventilation affect the heating?

Yes. Heat recovery cuts the heat the flat loses.

02Why change the filters?

Clogged filters reduce airflow and recovery.

03Who changes them in a let flat?

Agree this with the landlord.

04Can the pump be oversized if ventilation is ignored?

Yes. The assessment should include it.

05What if the flat feels stuffy?

Check the filters and the ventilation settings.

Talk to Heat Go

Ask about heat pump system assessment in Colindale.

Say whether your flat has mechanical ventilation, naming the Colindale road, and Heat Go can set out the assessor’s questions.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heat pump system assessment enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.