Heat pump system assessment · Kentish Town

Heat pump system assessment in Kentish Town: assessing the existing pipework, from its size and material to its routes and any old joints

A heat pump moves a larger volume of gentler water than a boiler, so pipes that were adequate for a hot, fast flow may be too narrow. Their material, their age and their routes also matter. An assessor will judge them, but a household can help by showing where they run. Households in Kentish Town can walk the house and note what they can see.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Houses in Kentish Town have pipes in copper and sometimes in older steel, running under floors and behind plaster. Over the years, extensions and alterations have added branches of different sizes. Joints may be soldered or old compression fittings that have weeping marks.

Five things matter. The size of the main flow and return pipes for heat pump assessment, which the assessor can read from the pipe’s outside diameter. The material and condition: copper, steel or plastic, green marks of corrosion, white scale or weeping joints. The route: which rooms the pipes cross, whether they are under floors or in the walls and whether they can be reached. The insulation on the pipes in cold spaces such as lofts and under floors. And the number of branches and any bottlenecks where the pipe size drops. Photograph pipes where visible and mark them on a rough plan. The assessor can then advise which sections need changing.

The number of floors in your house is all Heat Go needs to draft a pipework sketch template with a box for each room.

Showing the existing pipework to a heat pump assessor in a Kentish Town house

Pipework assessment questions in Kentish Town houses

Kentish Town houses with steel pipes in the loft

They corrode. Ask the assessor to check their condition.

Kentish Town homes with an extension added to the pipework

Pipe sizes may differ. Ask about bottlenecks.

Kentish Town: terraces with pipes under suspended floors

Routes are hidden. Ask for access to be planned.

SettingParking and van accessProperty accessTypical enquiries
Kentish Town houses with steel pipes in the loftRoadsideLoftOld steel
Kentish Town homes with an extension added to the pipeworkPermit zonesKitchenExtension branches
Kentish Town: terraces with pipes under suspended floorsDrives commonHallHidden routes

Give the assessor the plan and photographs and show him where pipes can be reached. Tell him about leaks, noises and past repairs.

A household in a Kentish Town terrace walks the house with a notebook and a phone. They photograph the flow and return pipes under the stairs, a green mark on a joint and a run of steel pipe in the loft. They draw a rough plan with the routes. The assessor reads it, measures the main pipe and finds it a size too small for the proposed unit, and flags the corroded joint. His report lists which pipes should be changed, in what order and how. The household files the plan, the photographs and the report. After the survey, the household asks the assessor how long the old pipework might last and what the signs of ageing are. He points to green staining at the joints and the dull knock in one run, and explains that thin pipe with many joints is more likely to need replacing. A page is added to the report listing the pipe sizes, the routes and a rough order in which to renew them. The household takes photographs of every joint he flagged and files them under the same dates, with the plan of the house.

Pipework is easy to see in dry weather when lofts and cupboards are pleasant to enter. A walk in September, before the heating starts, finds damp marks. A winter walk would find drips more easily but be colder work.

Good to know in Kentish Town

Outside diameter

The width of a pipe measured across its outer surface.

Bottleneck

A narrow part of a pipe run that limits the flow through the whole system.

Compression fitting

A pipe joint made by tightening a nut that squeezes a ring against the pipe.

Questions about heat pump system assessment in Kentish Town

01In Kentish Town, do my pipes suit a heat pump?

The assessor will judge their size and condition.

02For a Kentish Town household, what should I note?

Where pipes run and any marks or leaks.

03In Kentish Town, can I photograph them?

Yes, where visible.

04In Kentish Town, what if a joint weeps?

Tell the assessor and have it repaired.

05Kentish Town: heat pump assessment and a gas smell?

Use 0800 111 999 before anything; while Kentish Town heat pump assessment comes second, so Kentish Town heat pump assessment begins again later.

Talk to Heat Go

Ask about heat pump system assessment in Kentish Town.

Say how many floors the house has in Kentish Town, and Heat Go will set out a pipework sketch template with a box for each room.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Heat pump system assessment enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.