Flats with a rear wall flue
The opening may be the wrong size for a new flue. Ask how it will be altered and made good.
Boiler replacement · Hendon
A like-for-like swap sounds simple: the old boiler comes out and the new one goes in on the same spot. In practice the new boiler may have a different flue, different pipe connections and different clearances. A flat adds another layer, because the flue opening in the wall is shared property or at least needs the agent’s knowledge. Residents in Hendon can ask what will be reused and what will change before the date is set.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats over the parades around Hendon Central often have a boiler fitted decades ago, with a flue that passes through a back wall or into a duct. A new condensing boiler needs a flue of a different type and size, and the opening may need to change. The pipes behind the old boiler may also be in different positions from those the new one needs.
Four checks help. Compare the flue: ask what type the old boiler had, what the new one needs and whether the opening in the wall must change. Check the pipes: ask whether the existing connections line up with the new boiler or must be altered. Ask about making good: who repairs the wall and the cupboard after the old boiler is removed. And find out from the agent if the flue work needs notice or written permission. A short list covering each is enough to start the conversation.
Heat Go can sketch out the questions. Tell us what you know of the old boiler and its flue, and points for the installer and the agent can be set out.
The opening may be the wrong size for a new flue. Ask how it will be altered and made good.
A duct serves other homes. Ask the agent whether the new flue is permitted there.
Old shelves and boards may need to go. Ask what will be removed and replaced.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with a rear wall flue | Permit zones | Rear door | Wall openings |
| Flats with a flue in a shared duct | Roadside | Hall cupboard | Shared ducts |
| Flats with a long-standing boiler cupboard | Drives common | Kitchen | Cupboard alterations |
Tell the installer the age of the old boiler and show them the flue and the pipes. Give them the agent’s contact details.
A resident replaces a boiler fitted many years ago. The installer finds the flue opening is smaller than the new one needs, and proposes enlarging it and fitting a new terminal outside. The agent is told and notes the change in writing. The pipes are adjusted, the cupboard is made good and the new boiler is commissioned. The resident keeps a note of what changed, with photographs. The agent files the written note about the flue, and the neighbour on the floor above is told that a short period of drilling took place. When the resident next sells or lets the flat, the paperwork shows exactly what was done to the flue opening and who approved it. The installer also leaves a diagram of the new pipe connections, so that a future engineer sees at once how the cupboard is arranged. The installer also advises on the first service date, which falls a year after commissioning, and the resident puts it in the diary beside the lease renewal.
A swap is best planned in summer, so that the survey, the order and any consent are settled before the heating is needed.
Replacing one boiler with another of the same type in the same place.
The hole in the wall or duct through which the flue passes.
Repairing and finishing walls and cupboards after the work.
Often easier than a new installation, but the flue and pipes still need checking.
A new boiler may need a different type or size.
Agree this before the work begins.
For changes to a shared wall or duct, check the lease.
Often a day or so, though it depends on the work.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Give Heat Go a short description of the old boiler and flue, along with the Hendon street, and queries for the agent and installer can follow.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in HendonAll boiler replacement areas