Flats where the tenant works away
Access is the main issue. Agree who will be present and how the key will be handed over.
Boiler replacement · Colindale
When a boiler fails in a let flat, the landlord usually decides on a replacement, the tenant lives with the results and the installer needs access. Each has a part to play, and the work runs more smoothly when each knows it. A short exchange about dates, access and what is expected can save an afternoon of confusion. Residents of Colindale, whether tenants or landlords, can agree the arrangements in writing.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Many flats in Colindale are let, with a boiler in a cupboard and a tenant who may be at work during the day. The installer needs to enter, to switch off the power and the water and to work for several hours. The landlord should give notice, arrange access and keep the tenant informed. The tenant should clear the space and report any problems.
A good arrangement has five parts. Notice, in writing, of the date, the expected hours and the work to be done. Access, with a named person to let the installer in if the tenant is out. Preparation, with the cupboard cleared and valuables moved. Contact, so that the installer can reach someone if a question arises. And a record afterwards, with the boiler’s details, the settings and the paperwork. The landlord keeps the documents and the tenant a copy of the key points.
Heat Go can help you set out the arrangements. Tell us who will be present on the day and how access will work, and a short note covering the points can be drafted.
Access is the main issue. Agree who will be present and how the key will be handed over.
The agent arranges the visit. Ask for a named contact and the installer’s arrival time.
Others may be affected. Tell neighbours and ask the agent whether any notice is needed.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats where the tenant works away | Permit zones | Front door | Access |
| Flats looked after by a managing agent | Roadside | Entrance hall | Agent contacts |
| Flats with the boiler in a communal cupboard | Drives common | Common hall | Shared cupboards |
Tell the installer who is the landlord’s contact and who will be in the flat. Pass on any rules the building has about work hours.
A landlord arranges a replacement for a failed boiler. The tenant is told by message, with the date and hours confirmed in writing. She clears the cupboard the evening before and leaves the key with a neighbour. The installer arrives, works through the day and the heating is back by evening. The landlord receives the paperwork and sends the tenant a short summary of the settings. The tenant keeps the message in her phone, with the installer’s name and the date, in case anything needs to be reported. When the first service falls due the following year, the agent asks the tenant to confirm access in good time, and the engineer reads the commissioning record before he starts. The landlord notes that the process went more smoothly than the last replacement, because everyone had agreed the dates in writing beforehand. Nothing more is needed. The agent mentions that the same approach could be offered to other landlords in the building, and the landlord says that it costs nothing to try.
A swap arranged in summer, with no rush, lets landlord and tenant agree dates calmly. The new boiler is ready before the cold weather.
Written warning of work, with the date, hours and what will happen.
A document showing the checks made when a new boiler was first started.
The explanation of controls and settings given when the work is finished.
In a let flat, usually the landlord or their agent.
Not always, if access is arranged.
A written note of the date, hours and work.
A clear cupboard and a note of any concerns.
The paperwork and the boiler’s details.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go how access will work in your flat, naming your Colindale street, and a short note covering the points can be drafted.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in ColindaleAll boiler replacement areas