Houses with a living room fire and boiler behind
The opening will be larger than the new fire needs. Ask how it will be filled and finished.
Boiler replacement · Mill Hill
Some older houses have a back boiler, a boiler fitted behind a fire and sharing its chimney. Replacing it with a modern boiler elsewhere means removing the old unit, dealing with the opening in the chimney and deciding what to do with the fireplace. These are building questions as well as plumbing ones. Households in Mill Hill can ask how each will be handled, and by whom, before the work begins.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses around Mill Hill’s older roads sometimes still have a back boiler behind a living room fire, with a flue running up the chimney. The old boiler sits in the fireplace opening, often with an iron box and pipes through the wall. When it is removed, the opening must be made good, and the chimney must be capped or fitted with a vent to avoid damp.
A good plan covers five things. Where the new boiler will go, and how its flue will be run. How the old boiler will be drained, disconnected and removed, including the iron box. How the fireplace opening will be treated, whether sealed, made into a feature or fitted with a new fire. How the chimney will be dealt with, with a cap and a vent so damp does not build up. And how the pipes through the wall will be capped or reused. Written answers help the household and any builder.
Heat Go can help you plan removing a back boiler. Send photographs of the fireplace and chimney, and a few points for the installer and the builder can be listed.
The opening will be larger than the new fire needs. Ask how it will be filled and finished.
A shared stack needs care when capped. Ask whether a vent and cap will keep it dry.
Old pipes may run under boards. Ask how they will be capped or removed.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a living room fire and boiler behind | Drives common | Living room | Fireplace openings |
| Houses with a chimney shared with a neighbour | Roadside | Rear garden | Shared chimneys |
| Houses with the boiler pipes through the floor | Permit zones | Hallway | Floor pipes |
Tell the installer what you want from the fireplace: a feature, a new fire or a sealed opening. Show them the chimney outside.
A household replaces a back boiler. The installer fits a new boiler in the kitchen with a flue through the wall, drains and removes the old unit and iron box, and caps the pipes. The chimney is capped with a vent. The fireplace is fitted with a new, smaller fire, and a builder makes good the plaster. The house is warm and the chimney stays dry. The household keeps the builder’s invoice and the photographs of the capped chimney with the boiler papers, and the installer writes the position of the capped pipes on a sketch. When a new owner asks about the old fireplace years later, the sketch shows what lies behind the plaster. The household also checks the chimney vent each autumn, as the installer advised, and sweeps any leaves from the cap before the damp season begins. The builder’s note about the cap’s height and material is attached to the sketch, so that whoever next climbs the ladder knows what is there.
Work on a chimney is easier in dry weather. Planning a back boiler removal for late summer lets any building work finish before the damp season.
A boiler fitted behind a room fire, often sharing its chimney.
A cover on the top of a chimney that keeps out rain while allowing ventilation.
The cast iron casing that holds a back boiler in a fireplace opening.
Yes, but the opening must be made good and a new fire may be fitted.
To let air through and avoid damp inside it.
The installer or a builder, as agreed in advance.
Some dust is likely. Agree how rooms will be protected.
They can be capped, reused or removed.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Send Heat Go photographs of the fireplace and your Mill Hill road, and points to settle with the installer and builder can follow.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in Mill HillAll boiler replacement areas