Flats in hard water areas
Scale builds in the plate heat exchanger. Ask whether it needs flushing.
Boiler servicing · Colindale
A combi boiler in a flat does two jobs: it heats the radiators and it heats water as the taps run. The second job relies on a small plate heat exchanger and a filter that can clog, and a flow sensor that can stick. A service that looks only at the burner may miss them. Residents of Colindale can ask for the hot water side to be tested as well as the heating.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Newer flats in Colindale often have a combi in a cupboard, working hard in a small space. The mains filter, the plate heat exchanger and the flow sensor are all sensitive to scale and grit. If hot water runs warm and then cool, or takes a long time to arrive, one of these may be the cause. A service should test the hot water output as well.
Ask for four extras. The mains water filter, removed and cleaned. The plate heat exchanger, checked for scale and flushed if needed. The flow sensor, tested for movement. And a hot water test: the engineer runs a tap and measures the temperature and the flow, comparing them with the maker’s figures. A note of the results shows whether the hot water side is healthy and what, if anything, needs to be done.
Heat Go can help you ask for a combi service that covers hot water. Tell us how the hot water behaves and what the boiler is, and the points to raise can be listed.
Scale builds in the plate heat exchanger. Ask whether it needs flushing.
Hot water takes time to arrive. Ask the engineer to check the flow at the farthest tap.
Grit may have reached the filter. Ask for it to be cleaned and checked.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats in hard water areas | Permit zones | Kitchen | Scale |
| Flats with a long run to the bathroom | Roadside | Bathroom | Long runs |
| Flats with a recent plumbing job | Drives common | Hall cupboard | Debris |
Tell the engineer about any hot water problems, such as fluctuations or slow warm-up, and which tap shows them most.
A tenant notes that the shower runs hot and then cool. At the service the engineer cleans the mains filter, which holds a little grit, and checks the plate heat exchanger, finding some scale. He flushes it and tests the flow sensor, which moves freely. The hot water reading is within the maker’s range. The shower is steady from then on, and the report lists each step. The landlord receives the report and files it with the tenancy documents. The tenant keeps a photograph of the flow and temperature readings, which she compares with the next year’s. When her neighbour complains of the same fluctuation, she tells her what was found and suggests asking for the filter and the heat exchanger to be checked. Her neighbour’s next service includes both, and the shower there steadies too. The tenant sends the landlord a one-line note about the flow readings so that the record is complete, and the landlord adds the date of the next service to the property diary.
A combi service in September covers the hot water side before the cold weather makes the shower more welcome.
A compact part inside a combi where the boiler’s heat is passed to the mains water.
A small mesh that stops grit and debris entering the boiler from the mains.
A part that senses when a tap is open and tells the boiler to heat water.
It needs the hot water side checked as well as the heating.
A clogged filter, scale or a sticking flow sensor are possible causes.
Often, by flushing the heat exchanger.
The report should list the temperature and flow readings.
Often, and it can be cleaned at the service.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go how your hot water behaves, with your Colindale street, and the points to raise at the service can be listed.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in ColindaleAll boiler servicing areas