Highgate houses with loft, ground and basement zones
Each zone has its own valve. Ask the engineer to test them in turn.
Boiler servicing · Highgate
A big house often has a big system: several zones, a cylinder, two pumps and a long run of pipes. A service that covers only the boiler leaves much of that unchecked. Households in Highgate with larger systems can ask what the visit will cover and how long it will take, so that nothing is missed.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Many larger houses in Highgate have heating that has grown with the building. A loft extension may have its own zone, a basement may have underfloor heating and a cylinder may feed three bathrooms. Controls and valves sit in different cupboards, and no one may know where they all are.
The extra checks fall into five groups. The zone valves and their controls, tested one by one to make sure each opens and closes. The pumps, which should run quietly and move water in the right direction. The cylinder and its controls, including any thermostat and immersion backup. The expansion vessel and the pressure, noted at the start and end of the visit. And the water in the system, with a note of its colour and a check of any filter. Ask the engineer to list each zone and what was found. A map of the house with the zones and valves marked is useful for the file.
Heat Go can assist you to draw up the list of zones. Describe the rooms and controls, and a one-page chart for the engineer can be made.
Each zone has its own valve. Ask the engineer to test them in turn.
The manifold needs a look. Ask whether it is part of the visit.
Demand is high. Ask for the cylinder and its controls to be checked.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Highgate houses with loft, ground and basement zones | Roadside | Utility room | Multiple zones |
| Highgate houses with underfloor heating on their ground floor | Drives common | Hallway | Underfloor systems |
| Highgate: conversions with a cylinder serving several bathrooms | Permit zones | Landing | Large cylinders |
Show the engineer where the controls, pumps and valves are. Tell them about any room that has never heated well, or any zone that behaves differently from the rest.
A large Victorian household books a service and asks for each zone to be tested in turn. The engineer finds a zone valve that opens slowly, which explains why the top floor takes an hour to warm. He replaces the valve’s motor, notes the pressure at the start and end, and records the colour of the water. The household receives a one-page chart of the zones with each valve marked. When another engineer visits the next year, the chart saves a long search through cupboards. Before he leaves, the engineer gives the household a short note of the pressure at the start and end of the visit, and which zones were tested. The note is stapled to the chart, and next year’s engineer finds both in the utility room, so that the second service starts from known figures rather than from a blank page.
Multi-zone systems are best serviced in early autumn, when each zone can be tested without chilly rooms. A winter visit may need to leave some zones on, and the testing is less complete. A house with guests in the cold season may not be able to switch zones off at all.
A section of a house served by its own heating control and valve.
A fitting that splits one pipe into several, often used for underfloor heating loops.
An electric element in a cylinder that heats water without the boiler.
Ask the engineer to say which zones are tested.
Longer than a simple one, so ask for the time needed.
Yes, it helps future engineers find valves and pumps.
Yes, with its controls and any backup heater.
Go outside; 0800 111 999 first, Highgate boiler servicing is delayed, and Highgate boiler servicing waits for clearance.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Give Heat Go your Highgate street and the number of zones, and a chart for the engineer will be drafted.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All boiler servicesEvery service in HighgateAll boiler servicing areas