Houses with a cooker that stands on the floor
Check it is level and the hose is not strained. Ask about any restraint.
Cooker & hob installation · Hornsey
The day a new cooker arrives is busy. The old one comes out, the new one goes in and the household wants to cook. A few checks on the day make sure the job is complete. A short list near the cooker is enough. Households in Hornsey can run through it with the installer before they leave.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Hornsey have kitchens of many layouts, and a new cooker or hob changes the details. The connection, the flame, the ignition and the position all need checking. A handover explains the controls and any quirks.
Seven checks apply. The cooker sits level and stable, and is in its planned position. The connection is made and tested, and the installer says so. Each burner lights and burns evenly. The oven lights and heats. The controls work and the clock or timer is set. The warning signs are explained. And the paperwork, manual and record are handed over. Ask the installer to show you the isolation valve. Take photographs of the label and the connection. If anything is wrong, say so before the installer leaves.
Heat Go can help you prepare for the day. Say what is being fitted, and a short fitting-day checklist can be written.
Check it is level and the hose is not strained. Ask about any restraint.
Check the seal to the worktop. Ask about the connection access.
It is heavy. Check the position and level.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a cooker that stands on the floor | Roadside | Kitchen | Freestanding |
| Houses with a hob set into the counter | Drives common | Kitchen | Built-in hobs |
| Houses with a large range cooker | Permit zones | Kitchen | Range cookers |
Walk through the checks with the installer, light each burner yourself and ask any question before they leave. Have a pan of water ready to test the flame under load, and a spare saucepan lid for the oven shelf check, and ask the installer to watch while you boil it, since a burner that looks fine empty can behave differently with a pot on it.
A Hornsey household’s new cooker arrives. The installer levels it, connects it, tests the joint and shows them the valve. They light each burner and the oven, the flames burn evenly, and the clock is set. He explains what a yellow flame means. They take a photograph of the label and file the manual and record. A week later, a visitor asks how to light the oven and they can show them. They also stick a small note inside a cupboard door with the installer’s name, the date of fitting and where the isolation valve sits, and show a neighbour who will feed the cat while they are away. When a pan boils over in the first fortnight and puts out a flame, they remember what the installer said about waiting before relighting and follow it exactly. The record goes into the kitchen folder, with the date of fitting written on the front and the cooker’s model number copied beneath it for later reference.
A cooker fitted before the autumn gives the household time to learn it before festive cooking and winter meals. Trying every burner on an ordinary weeknight, and asking the installer any question that arises, is far better than discovering a quirk on the busiest day of the year with guests on the way.
A tap that cuts the gas supply to a single appliance.
A fitting that stops a freestanding cooker from being pulled out and straining the hose.
A flame of steady, blue colour around the burner without yellow tips.
Level, connection, flames, controls, paperwork and the valve.
Yes, with the installer present.
Say so before the installer leaves.
The manual and a record of the work.
Go out of the front door and use 0800 111 999 from outside; stay away from switches and flames until help arrives.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go what is being fitted in your Hornsey kitchen, and a fitting-day checklist can be written.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in HornseyAll cooker & hob installation areas