Flats with a cooker control unit on the wall
The unit and its cable have a limit. Ask whether they suit a larger cooker.
Cooker & hob installation · Colindale
Replacing an electric cooker in a let flat is not a casual swap. The cooker draws a large current, needs its own circuit and is connected through a switch on the wall or a plug in a socket made for it. The new cooker must suit the circuit that serves it. A tenant or a landlord who checks before ordering avoids tripped breakers and scorched cables. Residents of Colindale can make the checks with the help of the rating plate.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Flats in Colindale commonly have an electric cooker connected through a cooker control unit on the wall, with a thick cable running to the back of the appliance. Some have a hob and an oven on separate circuits. The size of the circuit limits what can be fitted. A cooker with a higher rating than the circuit allows will trip the breaker or overheat the cable. The landlord should be consulted.
Four steps make a safe replacement. Read the rating plate of the old cooker and the new one, and compare the loads. Find the cooker control unit and the breaker that serves it, and check their ratings. Ask the landlord whether the circuit can carry the new load, and whether an electrician is needed to check or alter it. And have the cooker connected by a competent person, with the connection tested. If the new cooker is larger, the circuit may need upgrading before it is used.
Heat Go can help you compare ratings. Send the old and new cooker’s plates and a photograph of the control unit, and a few points to raise with the landlord can be drafted.
The unit and its cable have a limit. Ask whether they suit a larger cooker.
Each may have its own circuit. Ask which breaker serves which, and the ratings.
Ownership affects who pays. Agree in writing who arranges the connection and any check.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats with a cooker control unit on the wall | Permit zones | Kitchen | Control units |
| Flats let with a built-in oven and separate hob | Roadside | Open-plan kitchen | Separate circuits |
| Flats where the tenant owns the cooker | Drives common | Galley kitchen | Tenant-owned cookers |
Give the electrician or installer the ratings from both cookers and tell them who owns the new one.
A tenant buys a larger electric cooker. She reads the plates and finds the new one draws more than the old. She asks the landlord, who arranges an electrician. He finds the circuit is rated for the new load and the cable is sound, and he replaces the control unit with a newer one. The cooker is connected and tested. The tenant keeps the electrician’s note, and the landlord adds it to the property records. She also learns to keep the cooker’s instruction book with the plate details taped inside, so that anyone who services it knows the rating at a glance. When she next moves, the electrician’s note goes with her tenancy papers, and the landlord keeps the original in the property file. The whole exchange, from checking the plates to the finished connection, takes less than a week, and nothing trips.
A check before buying is quick, and a replacement planned in September leaves time for any work to the circuit before the cold nights.
A wall switch, often with a socket, through which an electric cooker is connected.
A label showing the model and the electrical load of an appliance.
A run of cable from the consumer unit that supplies one appliance or a group of outlets.
Only if the circuit and control unit can carry the load.
It depends on the tenancy. Agree in writing.
Leave, avoid switches and phone 0800 111 999 straight away.
A competent person, with the work tested.
The electrician’s note and the cooker’s plate details.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Send Heat Go the rating plates and your Colindale road, and points to raise with the landlord can be drafted.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in ColindaleAll cooker & hob installation areas