Cooker & hob installation · Mill Hill

Cooker and hob installation in Mill Hill: a gas hob with a large wok burner and what it demands of the supply

A wok burner delivers a large flame and a large appetite. It draws more gas than a standard ring, so the pipe that feeds it must be able to deliver. It also gives off more heat and fumes, which affects the worktop, the extraction and the wall behind. Households in Mill Hill who like the idea can ask before ordering whether their kitchen is up to it, and plan the supply and the extraction at the same time.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Kitchens in Mill Hill houses often have a gas supply pipe laid for a standard cooker, sized for its needs. A hob with a high-output burner needs more gas at the same moment as the other burners are used. If the pipe is too small, the flame may falter when several burners are lit. The extraction above the hob must also be sized for the heat and fumes the wok burner gives off.

Five questions guide the decision. What is the total gas rate of the hob, as stated on its rating plate? Can the existing pipe and the meter carry that rate? Is the extraction powerful enough, and does it vent outside? Are the worktop and the wall behind suitable for a hotter flame? And does the hob’s installation sheet state a minimum distance to units above? The installer can measure and answer the first two, and the maker’s sheet the others. A written answer lets you decide with the figures in front of you.

Heat Go can help you check a wok burner hob against your kitchen. Send the hob’s details and a photograph of the supply, and a set of queries for the installer can be prepared.

Checking a high-output gas hob against a Mill Hill kitchen

Wok burner questions in different Mill Hill homes

Houses with a standard pipe from a former cooker

The pipe may be too small for a big burner. Ask the installer to measure and advise.

Houses with a recirculating extractor

Recirculating hoods do not remove steam and heat. Ask about a hood that vents outside.

Houses with a timber worktop

Heat can mark or char timber. Ask about the distances the maker states and a protective upstand.

SettingParking and van accessProperty accessTypical enquiries
Houses with a standard pipe from a former cookerDrives commonKitchenPipe size
Houses with a recirculating extractorRoadsideUtility areaWeak extraction
Houses with a timber worktopPermit zonesBack kitchenHeat on timber

Give the installer the hob’s model and rating and tell them which other gas appliances share the supply.

A household buys a hob with a wok burner and asks the installer to check the supply. He finds the old pipe is narrow and recommends a larger one from the meter. The extraction is upgraded to a hood venting through the wall. The hob is fitted, tested and every burner is lit, including the wok ring at full flame. The household keeps the note of the new pipe size. The installer also explains that the hob’s safety valve closes the burner if the flame goes out, and shows the household how to relight a wok ring after a spill. The extraction is tested with a piece of tissue held beneath the hood, which is drawn up smartly. The household notes the date of the work on the inside of the cupboard door and promises to wipe the burner caps after every use, since grease is the enemy of a clean flame.

A supply upgrade needs time. Starting the conversation in summer leaves September for the work, before the family’s cooking moves indoors for the winter.

Good to know in Mill Hill

Gas rate

The amount of gas an appliance uses, usually given in kilowatts or megajoules per hour.

Wok burner

A high-output burner on a hob, designed for fast, intense cooking.

Rating plate

A label on an appliance that gives its model and its gas or electrical rating.

Questions about cooker & hob installation in Mill Hill

01Can any hob go on any supply?

Not always. The pipe and meter must carry the gas rate.

02Might the supply pipe have to be replaced?

Possibly. The installer will measure and advise.

03What if I smell gas around the hob?

Turn off at the valve if safe, get out and phone 0800 111 999.

04Does extraction matter?

Yes. A wok burner makes more heat and fumes.

05Will the worktop cope?

Check the heat limits and clearances in the maker’s sheet.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about cooker & hob installation in Mill Hill.

Send Heat Go the hob’s model and a photograph of the gas supply, with the road you live on in Mill Hill, and the points to put to the installer can be written out.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Cooker & hob installation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.