Plots reached by a narrow side passage
A narrow passage restricts airflow and carries sound, so measure the clear width before choosing it.
Heat pump installation · Barnet
The outdoor unit of a heat pump is the part that most people notice. It is larger than an air conditioner’s, it moves a lot of air and it needs a place with clear space around it. Where it goes decides how loud it seems to neighbours, how long the pipes must be and how the garden looks. People in Barnet can think about it before any quote is accepted, and should expect the installer to ask about it first.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Gardens around Chipping Barnet vary from small yards to long lawns, and many houses have side passages that are narrow or shared. An outdoor unit on a solid base at the back of the house, away from windows, is typical, but a passage gives little airflow and a front garden is visible to the street. The pipes run from the unit to the cylinder and the heating circuit inside, and shorter is better.
Five points decide the position. How far it is from the house, since water pipes lose heat and a long run is more work. The airflow, because the unit needs breathing space on every side. The noise, meaning how far the sound will carry and what stands in its way. The access, because it must be serviced. And the base, which must be level, firm and able to drain. A sketch with the candidate positions, the neighbours’ windows and the house marked is the quickest way to choose, and it can be redrawn in minutes when a better idea comes.
A sketch and photographs of the possible positions help Heat Go say which look workable. Mention the neighbours’ nearest windows and any passage or boundary.
A narrow passage restricts airflow and carries sound, so measure the clear width before choosing it.
A rear position near the house is quieter, but a pipe run along the garden is long.
The outdoor unit needs a roof, yard or wall, so ask the freeholder and the neighbours.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Plots reached by a narrow side passage | Roadside | Side passage | Narrow gaps |
| Houses with a long rear garden | Drives common | Rear garden | Long runs |
| Flats built above trading premises | Permit zones | Rear stairs | Limited space |
Explain how to reach the garden, the cylinder cupboard and the proposed unit positions. Say whether a gate or passage can carry a heavy unit.
A couple choose between a spot beside the back door and one at the bottom of the garden. They sketch both, measure the pipe run and note a neighbour’s bedroom window facing the garden. They photograph both spots and send the sketch to Heat Go. The reply points out that the back-door spot is closer and shielded by the house wall, while the garden spot would send sound toward the neighbour.
Installations are easiest in dry weather, when bases can be laid and trenches dug. Choosing the position in spring leaves time for the work in summer.
A level, firm slab or bracket for the outdoor unit, with room for drainage.
The insulated water pipes between the outdoor unit and the house.
The free space around the unit that lets it draw and discharge air.
Somewhere with clear airflow, a short pipe run, a firm base and as much distance as practical from neighbours’ windows.
It varies with the model and the spot, and a sheltered corner beside the house is generally kinder than the middle of the lawn.
Yes, a level, firm one that drains well, because the unit sheds water when it defrosts and a puddle that freezes is a hazard.
It can, but it will be visible from the street, so consider the neighbours’ view as well as your own, and check whether any local rules apply.
Short is better. Long runs lose heat and add to the work.
Talk to Heat Go
Heat Go will say which positions look workable if it has the sketch, the photographs and the name of your Barnet road.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in BarnetAll heat pump installation areas