Gas leak investigation · Barnet

Gas leak investigation in Barnet: how a home’s gas pipework is tested after an incident

A gas smell is an emergency, and this page cannot stand in for the free national number. Anyone in Barnet who can smell it now should leave the house, avoid every switch and flame and call 0800 111 999. Afterwards, once the emergency engineer has made things safe, a gas engineer will want to find the leak, repair it and prove the system sound. Knowing how that testing works takes some of the mystery and worry out of the process, and lets the household plan for a day without gas and hot water.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Homes around Chipping Barnet hold gas installations of many ages, some with steel pipes dating from the original build, others with copper added during later alterations. Pipes may pass through walls, under floors or inside cupboards, and their joints may have been made at different times by different people using different methods.

A typical investigation has four steps. The engineer first checks the meter and the emergency controls, then turns off the gas to appliances and tests the pipework with a gauge to see whether it holds pressure. If pressure falls, the leak is somewhere in the pipes, and the engineer traces it, using a leak-detection fluid or an electronic detector at joints, valves and appliance connections. Once the cause is found, it is repaired, and the whole system is tested again before the supply is restored, with the result written on the engineer’s note.

What an investigation involves, and what a household can expect, is something Heat Go can explain. A live leak is not part of that: 0800 111 999 handles emergencies. For the days afterwards, describe what happened and which appliances are involved.

What to expect when a gas engineer tests pipework in a Barnet home

Pipework questions in different Barnet homes

Houses with original steel pipework

Old pipes can corrode at joints. A pressure test shows whether they still hold.

Homes with a recent kitchen refit

New connections are a common place for leaks. Say when the work was done.

Flats with pipework in ducts

A leak in a duct may need access panels opened. Ask the managing agent for keys.

SettingParking and van accessProperty accessTypical enquiries
Houses with original steel pipeworkRoadsideMeter cupboardOld pipes
Homes with a recent kitchen refitDrives commonKitchenNew connections
Flats with pipework in ductsPermit zonesService ductConcealed pipes

Show the engineer the meter and each appliance, and point out any panel that gives access to concealed pipework.

After a gas smell and an emergency call, a household in Barnet arranges a gas engineer to investigate. The engineer turns off all appliances, connects a gauge to the pipework and watches the pressure fall. Using detection fluid at the hob connection, bubbles reveal a leaking joint. The joint is replaced, the system is tested and held, and the appliances are relit and checked one by one.

Pipework faults show up when appliances are used heavily, as at the start of winter, and a system tested and found sound is a comfort when the first cold snap arrives. A system tested and found sound after an incident gives confidence for the season ahead.

Good to know in Barnet

Pressure test

A test in which the pipework is connected to a gauge and watched for any fall in pressure.

Detection fluid

A liquid applied to joints that bubbles where gas escapes.

Re-test

After a repair, the system is tested again before the supply is restored.

Questions about gas leak investigation in Barnet

01How is a gas leak found?

By testing the pipework with a gauge and tracing any fall with fluid or a detector.

02Will the supply be cut during the test?

Yes, for part of it, so plan for no hot water and no cooking while the engineer works.

03Might the leak be hidden inside a wall?

Sometimes, in which case the engineer will say whether a panel or a patch of plaster needs opening, and how much.

04What if the test finds no leak?

The engineer will explain what was ruled out and what else to watch, and may suggest a second test later if the smell was strong but short-lived.

05And if the smell comes back after the repair?

Treat it as a brand-new emergency: go outside and call the free number at once.

Gas emergency

An emergency should not wait for an online enquiry.

If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.

Talk to Heat Go

Ask about gas leak investigation in Barnet.

Given a description of the incident, the appliances and your Barnet street, Heat Go can outline an investigation. If the smell is live, 0800 111 999 is the only number, and the form has no place.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Gas leak investigation enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.