Thermostats & heating controls · Colindale

Thermostats and heating controls in Colindale: a wireless thermostat that keeps losing contact with the boiler

A wireless thermostat is easy to fit and easy to forget until it stops working. When the heating will not come on, or comes on at odd times, the cause is often a weak signal or a flat battery. In a flat with thick concrete floors and walls, the radio signal can be hard to carry. Residents of Colindale can run a few simple checks before calling for help.

Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.

Gas Safe Register WaterSafe Heat Go G3 certified Heat Go Heating and Plumbing Engineer

Newer blocks around Colindale often have reinforced concrete floors and metal in the walls, which block radio waves. A receiver in a boiler cupboard may be a long way from a thermostat in a living room. A signal that works in summer may fail in winter as batteries cool, and a metal door on the cupboard can add to the problem.

Start with the batteries, since they are the commonest cause. Replace them with fresh ones of the right type. Check the display for a signal symbol or error. Move the thermostat nearer to the receiver for a test, and see whether the link returns. Open the cupboard door and see whether it changes anything. If the link comes and goes, note the times. Then re-pair the thermostat with the receiver, following the maker’s instruction. If it still fails, ask for the receiver to be moved or fitted with an external aerial.

Heat Go can help you narrow it down. Tell us when the link fails, what the display shows and where the receiver sits, and a few checks can be suggested.

Checking a wireless thermostat that loses its link in a Colindale flat

Wireless control problems in different Colindale flats

Flats with a boiler in a metal-doored cupboard

A metal door blocks radio signals. Ask about moving the receiver or fitting an external aerial.

Flats with the thermostat in the far room

Distance and walls weaken the signal. Ask whether a closer position will do.

Flats with several wireless devices

Other devices can interfere. Ask whether the thermostat’s channel can be changed.

SettingParking and van accessProperty accessTypical enquiries
Flats with a boiler in a metal-doored cupboardPermit zonesHall cupboardMetal doors
Flats with the thermostat in the far roomRoadsideLiving roomSignal distance
Flats with several wireless devicesDrives commonBedroomInterference

Tell the engineer the make and model of the thermostat and the receiver, and when the link fails. A photograph of the display is useful.

A tenant finds the heating will not come on one morning. The thermostat display is blank, and replacing the batteries brings it back. A week later the link drops again at the same time each evening. The engineer finds the receiver sits behind a metal door, moves it to the side of the cupboard and fits a small aerial. The link holds from then on, and the tenant notes the date. The landlord, told about the fault, agrees to keep a spare set of batteries in the cupboard and to ask for the receiver position to be written on the inventory. In the next heating season the link holds through the coldest weeks, and the tenant checks the battery symbol on the first of each month, so that no cold morning comes as a surprise. The engineer also suggests testing the link at the far end of the flat, to confirm that the new position has cured the problem in every room. The tenant keeps the old position noted on the inventory as well, in case the landlord ever wants the receiver returned to where it was.

Wireless links are easy to test in September, before the nights are cold. A check of batteries and signal can prevent a cold morning.

Good to know in Colindale

Pairing

The process of linking a wireless thermostat to its receiver so they can talk.

Receiver

The unit at the boiler that receives the thermostat’s radio signal.

Aerial

A short wire or rod that helps a receiver pick up a radio signal.

Questions about thermostats & heating controls in Colindale

01Why does my wireless thermostat lose contact?

Weak batteries, distance, walls or interference.

02Which batteries should I use?

The type the maker states, fitted fresh.

03Can the receiver be moved?

Often, with a short cable or an aerial.

04Do I need to re-pair after changing batteries?

Sometimes, following the maker’s instructions.

05Is a wired thermostat more reliable?

It avoids signal problems, if a cable can be run.

Talk to Heat Go

Ask about thermostats & heating controls in Colindale.

Tell Heat Go when the link fails and what you have tried, with your Colindale street, and a few checks can be suggested.

The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.

Thermostats & heating controls enquiry

What can we help with?

All fields marked * are required

We reply to the contact details you give. A UK number such as 07700 900123 works fine.