Highgate houses with original boards over joists
A system may fit between the joists. Ask how the boards are lifted and refitted.
Central heating installation · Highgate
Underfloor heating is an attractive idea in a large old room, giving even warmth and leaving the walls free. It is not a casual addition. It raises the floor, needs a flow temperature the boiler can supply and affects the finish above. A household that asks about all three, with the floor in view, will choose with open eyes. Households in Highgate, in large period houses with restored floors, are often curious.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Highgate often have boarded floors over joists, with tall doors and fine skirting. Underfloor systems come in several forms, some fitted between the joists beneath the boards, some laid over in thin panels, some set in screed. Each suits different floors.
For heating installation in Highgate, the questions are six. What type of system is proposed, and how does it suit the floor construction? How much will the floor rise, and what does that do to doors, thresholds and skirting? What flow temperature does it use and can the boiler or heat pump supply it? What finishes suit it: stone, tile, engineered wood or carpet, and what heat output does each allow? How will the system be zoned and controlled? And how will the pipes be tested before the floor is covered? Ask for the floor build-up on a drawing, with the heights stated. Ask to see a sample of the finish with the heat output stated. Keep the drawing, the test result and the manifold position.
For heating installation in Highgate, Heat Go can weigh it up. Say what the floor is like, and questions for the installer about underfloor heating can be written.
A system may fit between the joists. Ask how the boards are lifted and refitted.
A screed can carry pipes. Ask how much height is added.
These conduct heat well. For heating installation in Highgate, ask for the output figures.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Highgate houses with original boards over joists | Roadside | Drawing room | Original boards |
| Highgate houses with a solid kitchen floor | Drives common | Kitchen | Solid floors |
| Highgate houses with stone or tile finishes | Permit zones | Hall | Stone floors |
Show the installer the floors, the doors and the skirting, and say what finishes you prefer.
A household in a large house wants underfloor heating in a ground-floor sitting room. The installer lifts a board to see the joists and proposes panels between them beneath the boards, which keeps the floor height. He explains the flow temperature needed and tests that the boiler can supply it. He suggests engineered wood as a finish and gives the output. He draws the build-up and marks the manifold in a cupboard. The pipes are pressure tested before the boards are refitted, and the household has the drawing, the test note and the control settings in the folder. The household also asks how the new floor will be controlled and learns it is zoned from a small manifold with a thermostat in the room, so that the drawing room can be warm in the evening while the rest of the ground floor is held cooler. The installer sets the first week’s schedule and returns after a fortnight to adjust it. The household files the drawing, the test record and the settings with the floor’s maker’s sheet.
Floors are best opened in dry, mild weather, and an autumn job leaves the room warm for winter.
A fitting that divides a pipe into several circuits and carries a valve on each.
The layers of material that make up a floor, from the joists to the finish.
A flooring made of layers of wood bonded together, stable under heat.
It raises it, depending on the type.
Some types do. Ask the installer to look.
Stone, tile and engineered wood suit best.
By a pressure test before the floor is covered.
In Highgate, get everyone outside, stop heating installation in Highgate and phone 0800 111 999 first, while Highgate switches and flames stay unused.
Talk to Heat Go
Tell Heat Go about the floors at your Highgate house, and questions for the installer about underfloor heating can be written.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All central heating servicesEvery service in HighgateAll central heating installation areas