Houses with a cooker pushed tight against the wall
A squashed hose may kink. Ask for a longer hose or a bracket to keep the cooker clear.
Gas leak investigation · Mill Hill
If a Mill Hill kitchen smells of gas, the response is to leave the house, avoid sparks and switches, and make the call to 0800 111 999 from outside; nothing here substitutes for it. After the emergency visit, a frequent finding is simpler than people fear: a flexible hose behind the cooker has hardened, cracked or come loose. The repair is short and the testing thorough. Knowing how it goes can ease the worry.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Mill Hill often have cookers that have been connected for years, with a flexible hose running from a wall outlet to the back of the appliance. The hose can stiffen with age and heat, kink when the cooker is pushed back or loosen at the fitting. A smell may come and go as the cooker is used. The cooker and hose must be pulled out and examined.
The engineer follows a clear sequence. The supply to the cooker is turned off at the valve. The cooker is pulled out and the hose and both ends are inspected. The connection is tested with a leak detector or a suitable fluid. If the hose is damaged, it is replaced with one of the right length and type, and the fittings are checked. The connection is tested again, the cooker is pushed back to its stop, and then every ring and the oven are lit in turn. A note records the test.
Heat Go can prepare the questions with you. Tell us the cooker type and the age of the hose, and a list for the engineer can be drawn up.
A squashed hose may kink. Ask for a longer hose or a bracket to keep the cooker clear.
Moving wears the hose. Ask for a restraint and be gentle when pulling it out.
Age is a risk. Ask for the hose to be changed whenever the cooker is moved.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Houses with a cooker pushed tight against the wall | Drives common | Kitchen | Squashed hoses |
| Houses with a cooker that is regularly moved for cleaning | Roadside | Utility area | Frequent moves |
| Houses with an old cooker and original hose | Permit zones | Back kitchen | Aged hoses |
Tell the engineer when you first smelt gas and how often. Mention if the cooker was recently moved or cleaned behind.
A household smells gas near the cooker, leaves and phones the emergency number. The first engineer on the scene closes the valve feeding the cooker. The next day a gas engineer pulls it out and finds a cracked hose near the fitting. He replaces it, fits a restraint and tests the connection, then lights each burner and the oven in turn. The household keeps the note and agrees to look at the hose whenever the cooker is moved. The gas engineer leaves the old hose for them to see, showing the crack where it bent against the wall, and explains that a hose pinched behind a cooker can fail slowly without any warning. The household decides to keep the gap behind the cooker clear and to check the hose and the restraint whenever the kitchen is cleaned. They also note the date of the repair on the inside of the cupboard door, beside the emergency number.
A look at the hose is easy to make when the kitchen is cleaned, and a September check, before more cooking begins, catches wear early.
A bendable pipe that connects a cooker to the gas supply.
A fixing that stops a cooker being pulled forward far enough to put strain on its hose.
A device or fluid that shows where gas is escaping.
Get out, steer clear of flames and switches, and ring 0800 111 999.
It is one of the more common ones.
Whenever it shows wear, or when the cooker is replaced or moved.
Not usually. The hose and fittings are often enough.
With a detector or fluid, and every burner is lit.
Gas emergency
If you suspect a gas leak, call the National Gas Emergency Service immediately on 0800 111 999. The enquiry form below is for non-emergency questions.
Talk to Heat Go
Tell Heat Go about your cooker and when you smelt gas, with your Mill Hill street, and questions for the engineer can be drawn up.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All gas servicesEvery service in Mill HillAll gas leak investigation areas