Highgate houses with underfloor heating in a new kitchen extension
The loops want cooler water. Ask how the mix is set.
Heat pump controls & optimisation · Highgate
A large house often mixes underfloor heating in some rooms with radiators in others. The two need different water temperatures: underfloor loops work well with cooler water, radiators need warmer. A heat pump runs best at the lowest temperature that does the job, so the controls need to treat the zones separately. Households in Highgate can ask how theirs are set.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Houses in Highgate with extensions often have underfloor heating in the kitchen or the new family room and radiators in the older rooms. The two systems may share a heat pump through a mixing valve, a manifold or separate pumps. Settings may have been fixed at installation and never reviewed.
Five questions help. How many separate zones does the system have, and which use underfloor loops and which radiators. How is each zone’s flow temperature set, by a mixing valve, a separate controller or a weather curve. What are the current flow temperatures for each, and how were they chosen. Are the underfloor zones’ temperatures as low as they can be and still keep the rooms comfortable. And is the heat pump set to run at the lowest of the two or to supply both at once. Ask the engineer to explain the layout on a diagram. A lower flow temperature for the underfloor zones helps the heat pump run efficiently.
Heat Go can set out a zone-by-zone question list for your system if you tell it which rooms have underfloor heating.
The loops want cooler water. Ask how the mix is set.
Two systems share one pump. Ask how each is controlled.
Temperatures may be higher than needed. For heat pump controls in Highgate, ask for a review.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Highgate houses with underfloor heating in a new kitchen extension | Roadside | Kitchen | Underfloor zones |
| Highgate houses with radiators upstairs and loops below | Drives common | Landing | Mixed systems |
| Highgate houses where the settings were never reviewed | Permit zones | Plant room | Unreviewed settings |
Give the engineer the diagram, the current settings and notes on which rooms feel comfortable. Tell him which zones heat slowly.
A Highgate household has underfloor heating in a new extension and radiators in the older rooms, all served by one heat pump. They ask the engineer how the flow temperatures are set. He explains that a mixing valve gives the extension water at a lower temperature than the radiators get. He checks the values, finds the underfloor zone running warmer than needed and lowers it a few degrees. The extension stays comfortable. He draws a diagram and notes the settings. The household files both with the heat pump record. The household also asks the engineer to note, on the diagram, which pump serves which zone, so that a later visitor does not have to trace the pipes in the plant room. He labels each valve and pump with a small tag and writes the flow temperatures on the diagram. When a new guest bedroom is added the following year, the diagram makes it easy to decide which zone it should join.
Zone settings are best reviewed after the first winter, when the household knows which rooms are comfortable. A review in September lets changes bed in before the cold. Underfloor zones respond slowly, so allow a week or two after any change. Underfloor zones react slowly, so a change in September shows its result by October rather than in a day. A review before the first cold spell avoids a long wait while a room is chilly. After winter, a second look at the numbers shows whether the zones can run cooler still.
A valve that mixes hot and cooler water to send a set temperature to a zone.
A fitting that divides one pipe into several, often for underfloor heating loops.
A circuit of pipe laid beneath a floor to warm the room above.
Underfloor loops work with cooler water than radiators.
By a mixing valve, a controller or a weather curve.
Underfloor zones take a week or two.
Yes, ask for one.
Dial 0800 111 999 first, since Highgate heat pump controls pauses at once, and Highgate heat pump controls carries on later.
Talk to Heat Go
Tell Heat Go which rooms have underfloor heating, and a zone-by-zone question list for the engineer will be drafted.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All heat pumps servicesEvery service in HighgateAll heat pump controls & optimisation areas