Flats let to tenants
A log shared with the landlord avoids arguments. Agree who keeps it and where it is stored.
Heating system maintenance · Colindale
A newer flat’s heating system usually works quietly and is easy to forget until it does not. A simple log, kept by the tenant or the landlord, makes problems easier to spot and explain. A pressure that drifts, a radiator that was cold last month or a service date nobody remembers become a few lines on a page. Residents of Colindale can keep one with very little effort.
Certified for the work. Heat Go holds Gas Safe, WaterSafe, G3 and heating and plumbing certification. Call +44 7551 336264 to talk it through.
Many recent flats in Colindale have a compact boiler, a small sealed system and radiators sized to well-insulated rooms. With little water in the system, a small loss of pressure matters, and a minor fault can cause a cold morning. The boiler may sit in a cupboard, so a glance at the gauge is a habit worth forming.
A useful log has five columns. The date of each check. The pressure reading, cold. Any radiator found cold or noisy. Any top-up or bleed done. And the date and name of any visit. A line a month is plenty. The log can be kept in a notebook, a phone note or a sheet taped inside the cupboard. When an engineer comes, the history is ready, and a tenant and landlord can see what has been done.
Heat Go can help you set up a simple log. Tell us what the system looks like and who looks after it, and a sample layout can be suggested.
A log shared with the landlord avoids arguments. Agree who keeps it and where it is stored.
There is little water, so pressure matters. Check the gauge each month and note the reading.
Settings and schedules can change. Note any changes made in the app.
| Setting | Parking and van access | Property access | Typical enquiries |
|---|---|---|---|
| Flats let to tenants | Permit zones | Hall cupboard | Shared records |
| Flats with a compact sealed system | Roadside | Kitchen | Small systems |
| Flats with a smart thermostat | Drives common | Living room | Digital controls |
Show the engineer the log, which saves time and gives a clear picture of what has happened. Tell them about any change in the readings.
A tenant starts a log on the inside of the boiler cupboard door. In the first months the pressure holds steady, then in November it falls a little each week. She notes the readings and calls the landlord, who sends an engineer. The log shows the trend, and the visit traces a slow weep to one valve spindle. It is replaced and the gauge holds steady again. The landlord, shown the log, agrees to ask the engineer to look at the other valves in the flat during the same visit, and the tenant adds a new column for notes from the engineer. By spring the log holds a full season of readings, and the household can see that the gauge stayed within its normal range from the day the valve was changed. The landlord keeps a copy with the other records for the property, and a future tenant, handed the sheet at the start of a lease, can see at once how the heating has behaved and what has been done to it. The tenant adds one more habit: reading the gauge on the first of each month and writing the figure in the log. A future tenant who inherits the sheet will know at once what a normal reading looks like for this flat, and what a worrying one looks like.
A log started in September covers the heating season from the first cold night, so any pattern shows early.
A written record of the system pressure over time, showing any drift.
A pattern of change, such as a pressure that falls a little each week.
Adding water to a sealed system to restore its pressure.
It reveals trends a one-off visit can overlook.
Monthly, with the system cold, is a good start.
Whoever looks after the flat. Share it with the landlord.
Note it and report it, particularly if it keeps happening.
It can. Note any schedule or setting changes.
Talk to Heat Go
Tell Heat Go about your flat and Colindale street, and a layout for a simple log can be suggested.
The quickest way to talk to a Gas Safe, WaterSafe and G3 certified team is to call +44 7551 336264.
All central heating servicesEvery service in ColindaleAll heating system maintenance areas